Jrgb1~2: Rgb Led Connectors; Ez Debug Leds - MSI B450 TOMAHAWK MAX Quick Start Manual

JRGB1~2: RGB LED connectors

The JRGB1/2 connectors allow you to connect the 5050 RGB LED strips 12V.
JRGB1
Important
The JRGB1/ JRGB2 connector supports up to 2 meters continuous 5050 RGB LED
y
strips (12V/G/R/B) with the maximum power rating of 3A (12V).
Always turn off the power supply and unplug the power cord from the power outlet
y
before installing or removing the RGB LED strip.
Please use MSI' s software to control the extended LED strip.
y

EZ Debug LEDs

These LEDs indicate the status of key components during booting process. When an
error is occurred, the corresponding LED stays lit until the problem is solved.
JRGB2
1
JRGB1/2
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates the booting device is not detected
1
1 +12V
3 R
Extension cable 5050 RGB LED strips 12V
or fail.
JRGB1/2
2 G
4 B
Overview of Components
23