Installing the Sunshade
Groundsmaster 4000 Machine
or Reelmaster 3555 and 3575
Machines
1.
To properly align the frame, attach the
frame-alignment bar to the mounting tabs on the
rear of the sunshade frame with 2 flange-head
bolts (5/16 x 1-1/4 inches) as shown in
17.
Figure 17
1. Sunshade frame
2. Frame-alignment bar
3. Flange-head bolt (5/16 x
1-1/4 inches)
2.
For Models 03820 and 03821, skip to step 7.
For all other models, with the roll bar in the
raised position, remove the hairpin cotters and
the 2 pins
(Figure
Figure
4. Mounting tab
5. Retainer nut
18).
1. Pin
2. Roll bar
3.
Insert a washer (13/16 x 1-1/2 inches) onto each
bolt (3/4 x 4 inches) as shown in
g020204
1. Nut (3/4 inch)
2. Roll bar
4.
In the holes where the pins were removed,
install the bolts and washers
5.
Install another washer onto each bolt and secure
with nut (3/4 inch) as shown in
Torque the nuts 323 to 396 N∙m (238 to 292
ft-lb).
12
Figure 18
3. Hairpin cotter
Figure
Figure 19
3. Washer (13/16 x 1-1/2
inches)
4. Bolt (3/4 x 4 inches)
(Figure
19).
(Figure
g020023
19.
g020024
19).