Advertisement
Quick Links
Goosenecks and Accessories
Surface Mounting Your Littlite Lampset
All L-series Littlite lampsets are designed to be surface mounted without any additional
accessories required. The lampset can be mounted from the top or underside of the mounting
surface.
MOUNTING FROM THE TOP OF THE MOUNTING SURFACE.
Remove the Chassis Plate Screws {C} from the top of the lampset (Figure 1).
Figure 1.
On a standard Littlite lampset this will enable the chassis plate {A} to be removed from the
chassis assembly (Figure 2}.
Figure 2.
Advertisement
Summary of Contents for Littlite L Series
- Page 1 MOUNTING FROM THE TOP OF THE MOUNTING SURFACE. Remove the Chassis Plate Screws {C} from the top of the lampset (Figure 1). Figure 1. On a standard Littlite lampset this will enable the chassis plate {A} to be removed from the chassis assembly (Figure 2}. Figure 2.
- Page 2 Reattach the chassis and install the chassis plate screws {C}. MOUNTING FROM THE BOTTOM OF THE SURFACE Turn over your Littlite lampset and locate the two threaded posts {B} on the bottom of the chassis plate {A}. (Figure 4) Figure 4.
- Page 3 Figure 5. AUTOMOTIVE SERIES LITTLITES Directions for surface mounting L-5 and L-9 automotive series Littlite are identical to the standard lampsets except for the location of the cord set {D} (Figure 6) Figure 6. Because the cord set {D} is routed through the bottom of the chassis plate {A} a hole is required in the mounting surface to accept the cord set and strain relief.
- Page 4 Pull cord set through access hole and secure chassis plate to mounting surface via two screw holes {E}. Reattach the chassis and install the chassis plate screws {C}. © 2014 Littlite, LLC. Littlite LLC, PO Box 430 Hamburg, MI 48139 www.littlite.com www.littlitedirect.com (810) 852-4242...