Advertisement
Extension Wand Components
* Spare retention strap, lock nut, and rubber washer are supplied in case of loss.
Bracket
Lock Nut (2)
Rubber
Washer (2)
Retention
Strap (2)
* Retention
strap will be
damaged
by contact
with oil in
Aprehend
®
Important:
Before attaching the extension,
ensure the sprayer bottle is empty and the battery
is in off position. When using the extension wand,
the battery or compressor on/off switch should be
used to activate the sprayer.
Spare parts and replacement
batteries are available from
your supplier or directly from
www.aprehend.com.
Contact ConidioTec
directly if you
experience any
problems with
this equipment.
Wrench
Extension
Wand
www.aprehend.com
800.891.8610
Doc.# 40-100-42419
Extension Wand
Instructions
Advertisement
Table of Contents
Summary of Contents for Aprehend ConditioTec Extension Wand
- Page 1 * Spare retention strap, lock nut, and rubber washer are supplied in case of loss. Spare parts and replacement Bracket Lock Nut (2) batteries are available from your supplier or directly from Rubber www.aprehend.com. Washer (2) Retention Contact ConidioTec Strap (2) directly if you Extension Wand...
- Page 2 Fill spray gun bottle with Baseboard Application gun handle. Pull the flat part of the retention Aprehend and set the spray ® spray gun strap up and over the trigger to gun to the desired angle for keep the trigger fully depressed.
Need help?
Do you have a question about the ConditioTec Extension Wand and is the answer not in the manual?
Questions and answers