Panasonic CF-29 Series Operating Instructions Manual page 30

Dealing with Problems (Summary)
Touch Pad / Touchscreen (only for models with touchscreen)
The cursor cannot be con-
trolled properly
The cursor does not move in
scrolling area of the touch pad
Unable to input using the
touch pad
Unable to point correctly with
the stylus included with the
computer
Unable to input by touching
the display
Reference Manual
The Reference Manual is not
displayed
30
If you are using an external mouse, ensure that the external mouse has been connected
correctly.
Restart the computer by using the keyboard (Press
R ).
If the computer does not respond to keyboard commands, read "No response"
( page 31).
When the Microsoft IntelliMouse™ Wheel mode or the original mode is set for the touch
®
pad, only scroll operations are possible for the right part or bottom part of the touch pad.
In this case, cursor operations are possible by using the work surface excluding the right
part or bottom part. When no mode is set, the entire surface of the touch pad can be used
for cursor operations.
Has the Setup Utility been used to set [Touch Pad] to [Enable]?
When external mouse drivers are installed (e.g., Intellimouse), the touch pad may not be
used.
Has the touch pad driver been properly installed?
As a result of the physical characteristics of the touchscreen, sometimes the position of
the stylus does not match the position of the cursor on the screen. This is not a malfunc-
tion. Perform [Calibration] (
Has the Setup Utility been used to set [Touchscreen] to [Enable]?
When mouse drivers are installed (i.e. IntelliMouse), the touchscreen is unable to be used.
Has the touchscreen driver been properly installed?
Is Adobe Reader installed?
<For localized OS model>
If you have uninstalled Adobe Reader, install using the following procedures.
1 Select [start] - [Run], input [c:\util\reader\AdbeRdr60_enu_full_.exe], then select [OK].
Install Adobe Reader by following the instructions on the screen.
2 Update Adobe Reader to its latest version.
If your computer is connected to the Internet, start up Adobe Reader and select [Help]
- [Update].
If your computer is not connected to the Internet, select [start] - [Run], input
[c:\util\reader\Acro-Reader_6.0.2_Update.exe], then select [OK].
<For MUI OS model>
If Adobe Reader is not installed, install using the following procedures. When installing
the program, do not change the installation destination folder. If the destination folder is
changed, the Reference Manual cannot be opened from the [start] menu.
1 Select [start] - [Run], input the following, then select [OK].
English: [c:\util\reader\m\AdbeRdr60_enu_full.exe]
French: [c:\util\reader\f\AdbeRdr60_fra_full.exe]
German: [c:\util\reader\g\AdbeRdr60_deu_full.exe]
Italian: [c:\util\reader\t\AdbeRdr60_ita_full.exe]
Spanish: [c:\util\reader\p\AdbeRdr60_esp_full.exe]
Swedish: [c:\util\reader\s\AdbeRdr60_sve_full.exe]
Dutch: [c:\util\reader\nl\AdbeRdr60_nld_full.exe]
Finnish: [c:\util\reader\fi\AdbeRdr60_suo_full.exe]
Norwegian: [c:\util\reader\no\AdbeRdr60_nor_full.exe]
Install Adobe Reader by following the instructions on the screen.
2 Update Adobe Reader to its latest version.
If your computer is connected to the Internet, start up Adobe Reader and select [Help]
- [Update].
If your computer is not connected to the Internet, select [start] - [Run], input
[c:\util\reader\m\Acro-Reader_6.0.2_Update.exe], then select [OK].
, U , and select [Restart] with
page 13).