Advertisement
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
Estimated Assembly Time: 6 minutes
PLEASE USE ON/OFF TYPE"A" BULB MAX 60-WATT OR EDISON BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT
THERE ARE TWO 25-WATT EDISON BULBS IN THE BOX
C
B4
B3
B2
B1
A
St
Step 1
1
Make sure all parts could be aligned before assemble
Do not rotate lamp body too hard avoid base screw broke Put the shade(D) on the Harp(E),then
Screw the Lamp body (B1) onto the Lamp base (A)
Screw the Lamp body (B2) onto the Lamp body (B1)
S
Screw the Lamp body (B3) onto the Lamp body(B2)
th L
b d (B3)
t th L
Screw the Lamp body (B4) onto the Lamp body(B3)
Screw the Socket (C) onto the Lamp base(B4)
Be careful not to twist the power cord and tighten securely
ENJOY YOUR LAMP
H
D
E
G
F
Step2
St
2
Insert the Harp (E) into the Metal cap (F).
tighten the Finial (H)into the Harp (E)
Insert the bulb(F) into the socket(C).
b d (B2)
Step3
St
3
Put the light on a level surface to check
if everything is stable.
Advertisement
