Page 1
CONNECTING YOUR HEADSET TO AN iOS DEVICE...
Page 2
Step 1. Enable your iPhone’s Bluetooth. Go to iPhone Settings > Bluetooth > Turn Bluetooth ON. Make sure your Solos headset is close to your mobile device. Step 2. Create an account and from there you will be guided through...
Page 3
Step 3. You can start your connection process once you get to the ‘Connect Headset’ screen. Please go to your iPhone’s Bluetooth Settings and follow the next steps.
Page 4
Step 4. Now that you’re in your Bluetooth Settings, your headset will be listed under “Other Device’s”, next is to select your headset. *If other devices appear, be sure to know your model name/number. The ID will be displayed on your headset, for example in this format: SOLOS_46:2D:B8...
Page 5
Step 5. You will be shown this pairing code alert on your handset and your headset, now you need to tap Pair on your handset, and press the middle button on headset. * The headset and handset pairing keys should be the same.
Page 6
Step 5.1. On your headset you will see the confirm passkey screen. Press middle button on your headset to confirm.
Page 7
Step 6. Your selected device will now be shown under “My Devices”. Now that your iPhone and Solos is paired, the device will always appear as a connection option when you turn on the Bluetooth on your iPhone. Go to the next step...
Page 8
Step 6.1. Now press the middle button on your headset and you will recieve a pop up on the handset (see next step).
Page 9
Step 6.2. Select Allow and you will be taken back to the Connect Headset screen in app.
Page 10
Step 6.3. This is the screen you will see on your headset once you have successfully paired. *You may briefly see “Connecting” and “Connected! Open the Solos app” before the screen below. You’re ready to ride once you’ve completed the setup process!
Page 11
Step 7. You will see the message updated to “Connected to paired headset”. Press continue to connect to your sensors and log into third party apps to share your rides.
Need help?
Do you have a question about the Solos and is the answer not in the manual?
Questions and answers