Summary of Contents for I-Semble HAIRPIN LEG SHELF BRACKET
- Page 1 HAIRPIN LEG SHELF BRACKET INSTALLATION INSTRUCTIONS Revised November 2018 Review instructions fully prior to use for important safety information. Always check Rockler.com to confi rm that you are using the most recent version for your product.
- Page 2 GENERAL SAFETY WARNINGS This product is designed only for specific applications as defined in the instructions and should not be modified or used for any manner not described in these instructions. Use only recommended accessories. Before using the Hairpin Leg Shelf Brackets: READ, UNDERSTAND and FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS.
- Page 3 PRODUCT SPECIFIC SAFETY WARNINGS > Maximum weight limit: 25 lbs. (including shelf) > Minimum shelf thickness: 1/2" > The Shelf Brackets will not rest flush against the shelf before being attached with screws. This is not a defect in the product. The brackets have been made to flex enough that they can be screwed flush.
- Page 4 Install the Shelf Brackets and Shelf Countersinks 1. Separate the two parts of each Shelf Bracket by using the face upward included hex wrench to remove the screws that hold them together. Keep track of the screws. 2. With the table upside down on a non-marring work surface, install a Shelf Bracket on each rod of the Hairpin Table Legs: Bring the two parts of each bracket together around the rod and reconnect them with the screws you removed in the last...