Advertisement
Available languages
Available languages
-
Plastic material properties
may be affected by sterilizing
and high temperatures. This
can affect the fit of the cap.
-
Inspect the feeding teat
before use and pull the
feeding teat in all directions.
-
Throw away any part at
the first signs of damage or
weakness.
-
Do not alter the product
or parts of it in any way.
This may result in unsafe
functioning of the product.
AirFree™ vent insert
Benefit: The AirFree™ vent insert
keeps the teat full of milk during
feeding, even while the bottle is
held horizontally. This supports
an upright feeding position for
your baby in order to reduce air
ingestion. This helps reduce
common feeding issues
including wind and reflux (GER).
Assembly: Place the AirFree™
vent insert in the bottle before
you assemble the screw ring
with teat.
Warning: When you prepare
formula, make sure that all the
formula is fully dissolved to
avoid blocking the AirFree™
vent insert.
Note: Always make sure the
teat is full of milk by turning
the bottle upside down before
feeding your baby. While
feeding, make sure that the
AirFree™ vent insert points
upwards, in line with your baby's
nose (see image).
Compatibility: The AirFree™
vent insert only works with
4 oz/125 ml, 9 oz/260 ml and
11 oz/330 ml Philips Avent
Anti-colic bottle and Classic+
bottles, teat and screw ring.
The AirFree™ vent insert is not
compatible with the (I/II/III)
variable flow teat and the
Natural bottle range.
Note: When using an 11 oz/330 ml
bottle, the AirFree™ vent insert
insert will keep the teat full of
milk but it could be that you see
fewer air bubbles.
Philips Avent Anti-colic bottles
and Classic+ bottles can also be
used without the AirFree™ vent
insert.
Before first and every use
Disassemble all parts and clean
them in warm soapy water and
rinse them thoroughly. Sterilize
the parts in boiling water for
5 minutes or by using a Philips
Avent sterilizer. This is to ensure
hygiene. During sterilizing in
boiling water, make sure that
Advertisement
