Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for Gammex 163-DIG
- Page 1 Title...
- Page 2 Scale © 2019 by Gammex Inc. All rights reserved. The information contained in this guide is copyrighted and all rights are reserved by Gammex Inc. Copying, duplicating, selling, or otherwise distributing any part of this manual without the prior writ- ten consent of Gammex Inc.
-
Page 3: Table Of Contents
Getting Started ......1 Using the 163-DIG ..... . . 7 Capacity . -
Page 4: 163-Dig Scale Overview
Battery & Install Batteries are not included with the 163-DIG product. Refer to Scale Specifications on page 6 for the type of batteries to use. A display of Lo or the battery symbol on the 163-DIG readout indicates low batteries and replacements are required. -
Page 5: High Oxygen Warning
Independent Failure Mode Warning Do not use results from the 163-DIG to make changes to your system, do use the results to perform additional system checks. Section 1. 163-DIG Scale Overview... -
Page 6: Features & Specifications
Components Table 2-1. Parts and Accessories Part Number Description 163-DIG Digital Compression Scale 603061 Compression Foam Block 805972 Soft Case for 163-DIG (optional) Platform lined with thin foam Display Removable & Backlit LCD panel Capacity Units & Accuracy Select kg, lbs... -
Page 7: Features
Soft Case Features Initialization Sequence Upon power-on, 163-DIG performs a startup sequence countdown. Keep the unit on a flat and stable surface during initialization. At the end of initialization 163-DIG automatically zeroes. Zero/Tare Zero/Tare allows users to zero the scale for relative measurements, or measurements in different orientations. -
Page 8: Detachable Display Panel
Wriggle and slide the Display Panel upwards in the direction of the Platform while holding the release tab. The separated Display Panel is corded to the Platform Body and ready for use in desired orientation. Tare the scale when changing orientation. Figure 2-2. Display panel removed from 163-DIG Features... -
Page 9: Scale Specifications
Scale Specifications Table 2-2. Specification table Parameter Value Capacity 0-55 lbs. (0-25 kg) Accuracy ± 0.005 lb [0 - 2 lb], ± 0.02 lb [2 - 55 lb], ±0.002 kg [0 - 1 kg], ±0.01 kg [1 - 25 kg] Display Units g, lb:oz, kg, lb, oz Scale Dimensions... -
Page 10: Using The 163-Dig
Raise compression paddle (plate) to maximum height and center it. Turn off Flex-mode. Place the Model 163-DIG on the breast support approximately centered on the compression paddle. Optionally place the Foam Compression Block on top of the 163-DIG Platform, which is also useful for testing curved paddles. -
Page 11: Prone/Stereotactic Setup (90-Degree)
Power up and zero the 163-DIG flat and stable surface. Rotate the 163-DIG onto its narrow side on a flat and stable surface and zero the scale. Bring the 163-DIG to the Mammography system and very carefully apply pressure to clamp the scale between the compression paddle and detector. -
Page 12: Calibration
10 kg certified weight or combination of certified weights. Process While the 163-DIG is off press and hold the Unit button while holding the Power button until the display reads CAL. Immediately after, a random set of numbers appear (raw load cell value). -
Page 13: Maintenance And Support
• Avoid contact with alcohol. • Wipe after use with a damp cloth, if necessary. Contacting Gammex Support Technical support is available from Gammex Inc. Contact the Support department: • By telephone: +1 (321) 259-6862, option 3, then 3. •... -
Page 14: Gammex Symbols
In addition to the regulatory information contained in the body of this manual, the following supplemental regulatory information is provided. Gammex Symbols The following symbols are used in this guide and in Gammex’s product labels. WARNING: This symbol indicates a hazard that could result in major injury or equipment damage. -
Page 15: Reporting Health Or Safety Related Issues Or Concerns
Gammex products, contact Gammex directly. Modifications to Equipment WARNING: No modifications may be made to this unit without the expressed written consent of Gammex. Unauthorized changes may present a risk to user or patients and will void the warranty. Appendix A: Regulatory Supplement...
Need help?
Do you have a question about the 163-DIG and is the answer not in the manual?
Questions and answers