KitchenAid KFIL27CXMS Service Information page 24

Service Diagnostics Mode:
1. Activate the keypad by touching the screen.
2. Press and hold the Home button. While holding Home button press and hold the Temperature
button.
NOTE: If the Temp button beeps, you must start procedure over.
3. Release the Home button and the Temp button simultaneously.
4. On the service menu press service diagnostics .
NOTE: The Service Mode can be exited at any time by pressing the back key twice or if left
unattended for 20 minutes.
1. Freezer Compartment Thermistor
Status 01Pass
2. Refrigerator Compartment Thermistor
Status 01Pass
3. Evaporator fan motor & air baffle motor
Status 02 fan ON / air baffle cycles open and close
4. Compressor Status / Speed
Press an option to change compressor status or speed.
Status ON / MAX OFF / MIN
5. Defrost Heater / Bimetal
Status 01 Bimetal Closed
6. Defrost Mode
Press an option to change defrost mode - Adaptive defrost on 8 hour basic mode.
When switching options disreguard exit mode for ADC.
7. Button and Dispenser pad test
Touch any key or pad to test.
8. Dispenser Lighting
Select ON or OFF to test dispenser lighting.
9. Refrigerator compartment door switch
Status 02 door closed 01 door open
10. Freezer compartment door switch
Status 02 door closed 01 door open
11. Ice Door Motor
Place cup under ice chute, press ice dispenser to perform test.
Status 01 door closed 02 door opening 03 door open 04 door closing
NOTE: Prolonged time delay
12. Water Filter Gallon Usage
Status Gallons used since reset
21