Table of Contents
Advertisement
Quick Links
CUSTOMER
SUPPORT
INFORMATION
UI-IP8-DP
Programmable 8-button IP
Keypad Wall plate with PoE
Control of IP enabled devices on your LAN using
a single-gang Decora® Style Wall plate
Order toll-free in the U.S. 800-959-6439
FREE technical support, Call 714-641-6607 or fax 714-641-6698
Mail order: Hall Research, 1163 Warner Ave. Tustin, CA 92780
Web site: www.hallresearch.com E-mail: info@hallresearch.com
User's Manual
UMA1261 Rev A
Advertisement
Table of Contents
Related Manuals for Hall Research Technologies UI-IP8-DP
Summary of Contents for Hall Research Technologies UI-IP8-DP
- Page 1 User’s Manual UI-IP8-DP Programmable 8-button IP Keypad Wall plate with PoE Control of IP enabled devices on your LAN using a single-gang Decora® Style Wall plate UMA1261 Rev A CUSTOMER Order toll-free in the U.S. 800-959-6439 FREE technical support, Call 714-641-6607 or fax 714-641-6698 SUPPORT Mail order: Hall Research, 1163 Warner Ave.
-
Page 2: Table Of Contents
UI-IP8-DP Table of Contents 1.0 Introduction ..................3 1.1 General....................3 1.2 Features.....................3 2.0 Package Contents ................4 3.0 Configuration and Operation.............4 3.1 Installation Example: AV System & Room Control........4 3.2 Installation Example: Controlling Devices with RS-232 ......5 4.0 Configuration and Control via Web GUI..........6 4.1 Install the Hall Research Device Finder (HRDF) Software Tool ....6... -
Page 3: Introduction
Each button has two (2) color LEDs where the on/off state, color and brightness are programmable. The UI-IP8-DP includes a power supply or power can come from the compatible LAN network using PoE (Power over Ethernet). The UI-IP8-DP includes integrated battery-backed clock/calendar allowing the user to send commands based on specific day/time schedules. -
Page 4: Package Contents
UI-IP8-DP 2.0 Package Contents (1) Model UI-IP8-DP Keypad (1) 5VDC, 2.6A Universal Power Supply (1) USB Type A to Mini USB OTG connector (1) Pre-printed button labels (28 labels) (1) Blank button labels (28 labels) (1) User’s Manual 3.0 Configuration and Operation 3.1 Installation Example: AV System &... -
Page 5: Installation Example: Controlling Devices With Rs-232
3.2 Installation Example: Controlling Devices with RS-232 The UI-IP8-DP does not have any RS-232 ports, so if the device you want to control does not have IP connection but it has RS-232 control port, you can still use the keypad to trigger an additional device (Model CNT-IP-2 sold separately) to send the desired RS-232 Serial commands. -
Page 6: Configuration And Control Via Web Gui
UI-IP8-DP Rear Panel Connections DC 5V: Connect to the supplied 5V DC power supply if no PoE power is available from the network switch / router. Control: Connect to a compatible LAN network switch or router using a CAT5e/6 cable. - Page 7 For example, you can assign a new Static IP address or set it to DHCP if you want the compatible LAN network to assign the address. A hyperlink to the attached UI-IP8-DP is available to launch the webGUI in a compatible browser. Example screen for the selected keypad...
-
Page 8: Login To Webgui
Be patient as the webpage could take several seconds to load NOTE The default username is admin The default password is admin After correctly logging into the UI-IP8-DP, the webpage will have a series of tabs described below to view and control the systems functions. 4.3 Macro Settings Tab NOTE... - Page 9 Programmable 8-button IP Keypad Wall Plate Macro 1: Sequentially light, all buttons RED @ 100% on the keypad. Macro 2: Sequentially light, all buttons Blue @ 100% on the keypad. Macro 3: Turn off all the red LEDs (set brightness to 0%). Macro 4: Turn off all the blue LEDs (set brightness to 0%).
- Page 10 UI-IP8-DP Clicking the ADD button will display a list of up to 128 commands. UI-IP8-DP – Default command list Click on any of the available commands listed to change the delay time or interface type. Commands are strings that are sent to different targets or “interfaces”.
-
Page 11: Extension Macro Tab
Key Settings tab set the button mode to “Toggle”. 4.5 Command Settings Tab UI-IP8-DP – Command List Click the “Command Settings” tab to create, edit or delete command strings. © Copyright 2018 Hall Research, Inc. -
Page 12: Device Settings Tab
Click on the “Save Change” button to save the command. 4.5 Device Settings Tab The UI-IP8-DP lets the user enter a maximum of 16 devices with their specific IP addresses and port numbers. The name of each device can also be customized (no spaces are allowed in the name). -
Page 13: Key Settings Tab
Click on the “Key Settings” tab to select if a button “repeats” when held or it “toggles” between two (2) modes when pressed. UI-IP8-DP – Key Settings Repeat Key - Causes the button macro to be executed repeatedly as long as the button is being held down. -
Page 14: Network Settings Tab
The event can be set as “Active” or “Not Active”. Click on “Save Change” to save the changes to the event. 4.8 Network Settings Tab As shipped from the factory (or after restoring factory defaults), the UI-IP8-DP IP address is set for static IP address 192.168.1.50. Network Settings If changes are made, make sure to hit the Save button and then go to System Settings tab and reboot the system for the new IP parameters to take effect. -
Page 15: System Settings Tab
Restore Configuration – Used to upload a previously save configuration file. Reset to Default – Used to reset the UI-IP8-DP to factory defaults. Reboot after clicking the “ALL RESET” button. Reboot the Unit – Used to reboot the UI-IP8-DP without removing power ... -
Page 16: Time Settings Tab
Sunday in March and end on the 1st Sunday in November. 5.0 Telnet Commands (Port 23) The UI-IP8-DP is controllable by Telnet on port 23 of the devices IP address. The UI-IP8-DP responds with “Welcome to Telnet.<CR><LF>” when the user connects to the Telnet port. - Page 17 Programmable 8-button IP Keypad Wall Plate Command Response Description <SPACE>-----> vx.xx <-----<CR><LF> Show installed firmware version. (There is a leading space) Note there is a single leading space character in the response. FADEFAULT Set the device to factory defaults ETH_FADEFAULT Set IP settings to factory default REBOOT If a valid command is used, most likely...
-
Page 18: Firmware Upgrade
UI-IP8-DP 6.0 Firmware Upgrade Upgrade the firmware on UI-IP8-DP by using the webGUI (the preferred method) or using a PC or USB memory stick with the supplied Mini-USB cable. 6.1 Firmware Upgrade Using the WebGUI On the “System Settings” web GUI tab, under the “Firmware Upgrade”item, click the “Choose File”... -
Page 19: Troubleshooting
7.1 Contacting Hall Research If you determine that your UI-IP8-DP is malfunctioning, do not attempt to repair the unit instead, contact Hall Research Technical Support at 714-641-6607. To return the unit to Hall Research you must first get a Return Authorization (RMA) number. Package the unit carefully, if returning. - Page 20 © Copyright 2018. Hall Research, Inc. All rights reserved. 1163 Warner Ave., Tustin, CA 92780 Ph: (714)641-6607...