Advertisement
Available languages
Available languages
Quick Links
Please read and follow all of the instructions & safety precautions detailed below prior to using this product.
Failure to do so may result in serious personal injury and / or property damage.
•
Do not expose this product to heat sources (including open flame or direct sunlight)
•
Do not expose this product to water or liquids. If liquid enters the product, immediately unplug the
product from any connected power sources or devices.
•
Do not dissemble or modify the product
•
Avoid dropping this product (or any other heavy impact which might damage the internal circuit)
•
In the unlikely event of any abnormalities (such as strange odor, overheating, leaking, color change,
etc.), discontinue use immediately.
•
Avoid cleaning this product using liquids or chemical substances (use dry cloth only)
•
Only use attachments/accessories specified by the manufacturer
•
Dispose of this item properly (do not dispose of it in trash receptacles and do not attempt to incinerate
it)
•
This product is not a toy: KEEP AWAY FROM CHILDREN
•
This product cannot work on a glass or mirror surface. Avoid operating this mouse on a glossy
surface.
•
Avoid operating this product on a metal surface as it may disrupt transmission between product & USB
nano receiver
The T142 is a 2.4G wireless optical mouse with USB nano receiver. Please see below product specifications
& user guide.
T142 Specifications
1. Battery Type: 1x Grade A non-recycled non-rechargeable alkaline AA battery
2. Wireless Frequency: 2.4GHz
3. DPI (Dots Per Inch): 2 adjustable DPI levels (800 or 1600)
2ARPF-T142
4. FCC ID:
5. Product Size: 2 ½" x 4 ½" x 1 ¼"
6. Net Weight: 65g (weight does not include 1x AA battery)
7. Accessories included in the box:
•
1x T142 (USB nano receiver included)
•
1x Grade A non-recycled non-rechargeable alkaline AA battery
•
1x User Manual
WARNING
Safety Precautions
T142 USER MANUAL
Advertisement
Summary of Contents for Spectech T142
- Page 1 Avoid operating this product on a metal surface as it may disrupt transmission between product & USB nano receiver T142 USER MANUAL The T142 is a 2.4G wireless optical mouse with USB nano receiver. Please see below product specifications & user guide. T142 Specifications 1.
-
Page 2: Troubleshooting
** NOTE: Remove battery stopper prior first use (pull on the battery stopper tab) 1. ON: Switch the ON/OFF button to ON (a red LED will flash once to indicate the T142 is powered ON) 2. OFF: Switch the ON/OFF button to OFF Establishing a wireless connection between the T142 &... -
Page 3: Fcc Statement
LED will flash intermittently to indicate that battery replacement is recommended • it is recommended to switch the T142 power button OFF when not in use to conserve battery power CAUTION: Risk of Fire and Burns, don’t open, crush, disassemble and dispose of in fire. Accessible surfaces held or touched for short periods only. - Page 4 • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment...
- Page 5 Éviter de manipuler la souris sur une surface métallique car cela pourrait perturber la transmission entre le produit et le nano-récepteur USB. Manuel de l’utilisateur de la T142 La T142 est une souris optique sans fil 2.4G incluant un nano-récepteur USB. Ci-dessous le mode d’emploi du produit et ses spécifications. Spécifications de la T142 1.
- Page 6 2. ÉTEINDRE : Mettre l’interrupteur en position OFF Établir connexion sans fil entre la T142 et l’ordinateur laptop/bureau ** NOTE : Le système doit être configuré pour assurer l’installation de la T142 a) Système d’exploitation (compatible avec Windows 7/8/10/XP, Vista/ME/NT, DOS, Macintosh b) Port USB du laptop ou de l’ordinateur de bureau...
-
Page 7: Déclaration De La Fcc
4. Allumer la T142 (bouton ON/OFF) (LED rouge clignotera une fois pour signaler que la T142 est allumée) Dépannage Si la connexion entre la T142 et le nano-récepteur USB n’est pas établie, veuillez suivre les recommandations suivantes : a) Essayer/ré-essayer une nouvelle connexion sans fil entre le nano-récepteur USB et l’ordinateur Éteindre la T142 (position OFF) - Page 8 partie 15 des directives FCC. Ces normes visent à fournir aux installations résidentielles une protection raisonnable contre les interférences. Cet appareil génère, utilise et émet de l'énergie de fréquences radio et peut, en cas d'installation ou d'utilisation non conforme aux instructions, engendrer des interférences nuisibles aux communications radio.
- Page 9 USB. Manual del usuario del T142 El T142 es un mouse óptico inalámbrico 2.4G, que incluye un nano receptor USB. A continuación el modo de empleo y las especificaciones del producto. Especificaciones del T142 1.
- Page 10 3. Insertar el nano receptor USB en el puerto USB disponible del computador laptop o de escritorio (NOTA: no es necesario dispositivo de apareamiento) 4. Encender el T142 (botón ON/OFF) (LED roja parpadeará una vez para señalar que el T142 está encendido)
- Page 11 Solución de problemas Si la conexión entre el T142 y el nano-receptor USB no se establece, seguir las recomendaciones siguientes: a) Intentar/re intentar una nueva conexión inalámbrica entre el nano receptor USB y el computador Apagar el T142 (posición OFF)
- Page 12 Si este equipo ocasiona interferencias perjudiciales en la recepción de radio o televisión, lo que puede comprobarse encendiendo y apagando el equipo, el usuario puede intentar corregir la interferencia mediante una o más de las siguientes medidas: • Volver a orientar o a colocar la antena de recepción. •...