Related Manuals for Hive Siren
Summary of Contents for Hive Siren
- Page 1 Siren user guide Welcome to Hive. This guide tells you everything you need to know to set up your Hive Siren.
-
Page 2: What's In The Box
What’s in the box Please check the contents of your Hive Siren’s packaging before proceeding to install your Hive Siren. If you’re missing any parts please get in touch with our customer care team by visting www.hivehome.com/contact-us Siren Wall mount... -
Page 3: Tools You May Need
Tools you may need If you need to arrange for a professional installer to set-up your Hive Siren please contact our customer care team by visiting www.hivehome.com/install Important: If you are installing the Siren yourself you should be competent using power tools and working at heights. -
Page 4: Where To Place
Where to place The siren is best placed between the first and second floors of your home. You will need to place the Siren within 8m (26ft) of an internal power socket. - Page 5 If you don’t feel comfortable drilling through an exterior wall, contact Hive by visiting www.hivehome.com/install to arrange a professional installation. Always use safety and protective gear appropriate for the type of work and tools being used.
- Page 6 finisher over the cable from the outside. STEP 4 Fit the mounting plate Slide the Siren up off of the mounting plate and use a pencil or marker and a sprit level to mark out the four holes, for drilling, on the wall.
- Page 7 Siren. Wrap the cable around the cable management guide and push any excess cable back through the hole, leaving enough slack to fit the Siren onto the mounting plate. Now slide the Siren onto the mounting plate. STEP 7...
- Page 8 Triggering the Siren To ensure your Siren will sound in the event of an alarm, it must be added to a Mode. Your siren will be included as an output in Away mode as a default. Go to HomeShield Settings > Modes.
-
Page 9: Troubleshooting
Troubleshooting How to turn off Tamper alarm You may want to switch off the tamper detection alarm in the event that you want to move the siren, or change batteries – to do this you can disable tamper detect for 30 minutes. ... - Page 10 © 2017 Centrica Connected Home Limited. Registered in England (No. 5782908). Registered office: Millstream, Maidenhead Road, Windsor, Berkshire SL4 5GD. All rights reserved.
Need help?
Do you have a question about the Siren and is the answer not in the manual?
Questions and answers