Pro-Elec PEL00590 Instructions

Pro-Elec PEL00590 Instructions

Led illuminated electronic outdoor time delay switch

Advertisement

Model No. PEL00590
LED ILLUMINATED ELECTRONIC
OUTDOOR TIME DELAY SWITCH
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PEL00590 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Pro-Elec PEL00590

  • Page 1 Model No. PEL00590 LED ILLUMINATED ELECTRONIC OUTDOOR TIME DELAY SWITCH...
  • Page 2 Please read these instructions carefully before starting installation and retain for future reference. IMPORTANT SAFETY INFORMATION RISK OF ELECTRICAL SHOCK. ALWAYS ISOLATE THE POWER AT THE MAINS BEFORE INSTALLING OR MAINTAINING THIS SWITCH. • This product must be installed by a competent person in accordance with the Building Regulations and the current edition of the IET Wiring Regulations (BS7671).
  • Page 3 Fit the front part of the switch to the rear part and insert the 4 screws and tighten. Do not overtighten or you may strip the threads. 10. Restore mains power and wait 20 seconds for the switch circuitry to stabilise then activate the switch and check the ‘on’...
  • Page 4 CLEANING AND MAINTENANCE • Clean the product with a soft, dry cloth only. Do not use any solvents or abrasive chemical cleaners. SPECIFICATIONS Input voltage: 220-240V~ 50Hz Rated power handling: 700W - 3700W Incandescent lighting Fluorescent lighting Suitable for use with: Low voltage with transformer Ventilation fans and equipment Timer range:...

Table of Contents

Save PDF