Advertisement
Table of Contents
( F08 )
1. Assemblement
(Type 1a) FIX2CAR® with loose cable
(Type 2) FIX2CAR® with Flex-Arms
2. Installation in car
(Option 1) Mounted onto windshield with suction-cup
Insert the phone into the holder, and
WWW.FIX2CAR.COM
PRESS
TURN
connect the charger to 12/24V DC
cigarette socket.
QUICK SETUP GUIDE
(Type 1b) FIX2CAR® with hard-wired cable
'' CLICK ''
(Type 3) FIX2CAR® Side-Charged
(Option 2) Mounted onto dashboard with 3M-pad
REMOVE
TURN
now you are ready to go
& we wish you safe driving!
®
FIX2CAR® is a registered trademark of KRAM TELECOM A/S. All Rights Reserved ©2012
'' CLICK ''
Advertisement
Table of Contents
Summary of Contents for KRAM telecom FIX2CAR
- Page 1 Insert the phone into the holder, and & we wish you safe driving! connect the charger to 12/24V DC cigarette socket. ® WWW.FIX2CAR.COM FIX2CAR® is a registered trademark of KRAM TELECOM A/S. All Rights Reserved ©2012...
- Page 2 Daily Use CLASH!!! CAUTION Always remove your phone from the holder carefully. CAUTION Try to avoid tilts over 90° angle. Maintenance There is a possibility that over the years of frequent usage the bracket will loosen a bit. You can dismount holder from the “arm” as shown on the illustration bellow (A). Then gently tighten 4 screws about quarter of a turn each (B).
Need help?
Do you have a question about the FIX2CAR and is the answer not in the manual?
Questions and answers