TSM Optimix Initial Setup

Initial Setup – Starting the Blender
The following sequence should be completed on initial power up of the
blender.
1. Power up
Connect mains power lead. (Please
•
read the safety information in the
introduction section for warnings
and the maintenance section
page26-29 for the electrical
connections)
Check that the operator display is
•
showing the home screen
The TSM blender range are
•
designed to allow easy operation
for operators of all nationalities.
The system operation therefor
uses internationallly recognised
symbols.See user manual for
symbol descriptions
Touching the home icon allows the user to return to the
home screen from any screen
Doc no TD 107 Rev 1.1
Page 1
TSM Control Systems,
Ard Easmuinn,
Dundalk, Co. Louth, Ireland
Tel: (+353) 42-9335560 Fax: (+353) 42-9334422
Email: info@tsm-controls.com
Website: www.tsm-controls.com
Home screen
System Menu