Advertisement
Quick Links
tate
Wiltshire arbour seat
fencing
Parts supplied :-
Rear Trellis
Left Trellis
1)
Post are to be dug into ground approx 450mm
deep, at approx 670mm x 1280mm centres
Angled tops of posts go
at the top. With slants
arranged as shown here
450mm
installation guide
Arbour Top
Right Trellis
4 x posts
Seat Rear
Seat Bottom
The xings supplied vary depending on which trellis option you
have chosen for your Tate Fencing arbour seat :-
English Rose trellis option comes with
To x trellis
18no
6no
To x roof
To x seat
8no
Square trellis option comes with
To x trellis
18no
6no
To x roof
To x seat
8no
Heavy diamond trellis option comes with
To x trellis
18no
6no
To x roof
To x seat
8no
2)
Fix trellis between posts approx 75 -100 mm down from
top of posts using either 50mm screws if you have English
Rose trellis or 75mm screws if you have Square or Heavy
Diamond trellis. Fix where indicated with a
Fixings included :-
75 - 100mm
4 x 50mm
5 x 100mm
5 x 100mm
4 x 75mm
5 x 100mm
5 x 100mm
4 x 75mm
5 x 100mm
5 x 100mm
symbol
Advertisement
Summary of Contents for TATE FENCING Wiltshire arbour seat
- Page 1 Wiltshire arbour seat Fixings included :- installation guide The xings supplied vary depending on which trellis option you fencing have chosen for your Tate Fencing arbour seat :- Arbour Top Parts supplied :- English Rose trellis option comes with To x trellis...
- Page 2 Fit the roof in place. The TGV boards rest on top of the posts. The roof front and back frame is on the outside of the posts. It is then secured with 100mm screws through the face of the The roof comes in 2 sections which t together using 100mm frame in to the posts where indicated with a symbol screws through the frame where indicated with a...