Summary of Contents for GLG MKI
- Page 1 Replay MKI User Manual www.goedlichtengeluid.nl GLG is a brand name of GOED licht en geluid...
-
Page 2: Specifications
The software can be upgraded via SD card as following steps: The GLG Replay MKI is a very useful and versatile DMX tool. It can works as 1) Copy the new software (SSCR10AM & SSCR10AS) to the root directory of a DMX recorder, signal booster, signal converter and merger. - Page 3 ▪ 24CH DMX (Simple Desk) Product Overview 13. When Replay MKI is selected, you have the same layout as the unit. Now you can use your iPhone/iPad to replay the memories. When 24CH DMX is selected, you have a 24ch desk in your hand. Use page slider to select 1-3 page.
- Page 4 OPERATING INSTRUCTIONS 10. Click on OSC:192.168.16.254 (IP of RECORDER)， and then set Port(outgoing): 6454 and Port(incoming): 8000 as figure below. BRIDGE Under BRIDGE, the unit works as a signal converter. Press BRIDGE button and its LED is lit up. Then use MENU/ENTER/UP/DOWN to select different modes as below.
- Page 5 8. Click “Sync” on TouchOSCEditor and the name of PC/laptop will be shown RECORD on your iPHONE/IPAD. Data of lighting show can be recorded from the Ethernet network , WiFi or 2 DMX inputs. Each memory can be up to 20 hours. 1.
- Page 6 NOTE: MEM button without recording data can’t be selected in REPLAY. Replay or OSC 24CH DMX on a iPhone/iPad In order to use a iPhone or iPad to control the Replay MKI , you need to install TouchOSC and upload the interface of RECORDER on your iPhone/iPad.
Need help?
Do you have a question about the MKI and is the answer not in the manual?
Questions and answers