Vista Quest VQ515 User Manual page 41

Problem
Picture is not clear
The pictures are
blurred
The flash doesn't
fire
The computer
cannot
communicate with
the camera
Source
The lens is dirty
Hands were not steady
when taking the picture
The picture subject was
not in the focus range of
the camera
The flash mode is set to
Off
Camera power is off
USB cable is not securely
connected
Driver is not installed (for
Windows 98 user)
USB cable is not securely
connected
Driver is not installed
Solution
• Clean the lens.
• Ensure hands are steady when taking
picture and remain steady one minute
after clicking the Shutter button.
• Keep a minimum distance of 60 inches
between the picture subject and the
camera lens to stay in the focus range
of the camera.
• Set the flash to any other mode except
Off.
• Turn on the camera.
• Connect cable to camera and computer
port.
• Install the camera driver.
• Connect cable to camera and computer
port.
• Install the camera driver.
- 37 -