Advertisement
Arduino LED Guide
LEDs to be aware of:
•
ON (green): power presence
•
L (amber): presence of code
TX (amber): transmitting data
•
•
RX (amber): receiving data
When you plug the Arduino in for the first time:
On: solid
•
L: possibly blinking
•
•
TX: off
RX: off
•
When you are loading sample or test code to the
Arduino:
•
On: solid
L: will go off
•
TX: flashing then solid
•
•
RX: flashing then solid
When you have loaded the USB test sketch, but are not connected to a compatible Eos Family device:
On: solid
•
•
L: solid
•
TX: heartbeat
•
RX: off
When you have loaded the USB test sketch, and are connected to a compatible Eos Family device:
•
On: solid
L: solid
•
•
TX: heartbeat
RX: hearbeat
•
When you have loaded the Box 1 sketch, but are not connected to a compatible Eos Family device:
On: solid
•
•
L: will go off
TX: flashing then solid
•
RX: flashing then solid
•
When you have loaded the Box 1 sketch, and are connected to a compatible Eos Family device:
•
On: solid
L: solid
•
•
TX: flashes when you move pan/tilt or hit next/last on the box
•
RX: flashes when you move pan/tilt on Eos Family device
17
Advertisement
