Advertisement
Quick Links
Advertisement
Related Manuals for Somatic Vision Alive iFeel
Summary of Contents for Somatic Vision Alive iFeel
- Page 1 iFeel Sensor U S E R G U I D E S U P P L E M E N T...
- Page 2 Choose Your iFeel Sensor There are two versions of the iFeel Sensor: USB and Bluetooth. Read the section of the user guide that matches your sensor. IFEEL BLUETOOTH SENSOR If you have an iFeel Sensor with a rounded-square display, you have the iFeel Bluetooth Sensor. Please start reading from the iFeel Bluetooth Sensor section on the 5 page.
- Page 3 IFEEL USB SENSOR The iFeel USB Sensor is a highly accurate heart rate sensor that measures heart rate from a finger or ear. Depending on the package you purchased you may have a Clip Sensor (for your finger or ear) or a Soft Rubber Finger Sensor.
- Page 4 Clip Sensor Information The Clip Sensor can be placed on your finger or ear. The ear is convenient but has some limitations. If you are measuring heart rate from your ear, make sure to attach the white shirt-clip to hold the Clip Sensor up! 2) The signal is much stronger on the finger, so if you are getting movement errors move the clip to your finger or use a Finger Sensor.
- Page 5 IFEEL BLUETOOTH SENSOR The iFeel Bluetooth Sensor is a highly accurate heart rate sensor that measures heart rate from a finger or ear. Your computer must have Bluetooth to use the iFeel Bluetooth Sensor. 1) Attach the Clip or Foam Sensor to the iFeel Sensor (“Biosense Sensor”). Place the iFeel device on the table, your lap, or wear it as a wrist-watch.
- Page 6 you. Adjust the velcro on the finger sensor so it is snug, but not very tight. The sensor should be in constant contact with your finger with no gaps. 7) The iFeel Sensor displays SpO2 on the left side, and average heart rate on the right side.
- Page 7 MY COMPUTER DOESN’T HAVE BLUETOOTH Somatic Vision does not provide support to help add Bluetooth adapters to computers without Bluetooth. Please follow these steps and seek professional assistance if needed. 1) Purchase a Bluetooth USB Adapter (preferably one with good reviews from a major name brand).
- Page 8 PAIRING THE IFEEL SENSOR To Pair (in any version of Windows), first attach the iFeel Sensor to your finger or ear, then turn it on (it may turn off if not attached to your finger or ear). WINDOWS 8 AND ABOVE: Click the Start Menu button, type "bluetooth settings", then click Bluetooth Settings. In Bluetooth Settings find the "iFeel Labs"...
- Page 9 THE IFEEL LABS DEVICE IS CONNECTED BUT IS SENDING BAD DATA If you are able to connect to the iFeel device, but you get bad data please check the Port Settings for your COM port. Open Device Manager (click Start, then type "device manager", then click Device Manager) then double click the "Standard Serial over Bluetooth"...
- Page 10 © 2014-2018 Somatic Vision Inc. Alive is a trademark of Somatic Vision Inc. All rights reserved. Manufactured under license from Quantum Intech, Inc. Quantum Intech and the Quantum Intech logo are trademarks of Quantum Intech, Inc. in the U.S. and other countries. HeartMath and the HeartMath logo are trademarks or registered trademarks of the Institute of HeartMath in the U.S.
Need help?
Do you have a question about the Alive iFeel and is the answer not in the manual?
Questions and answers