T-Studs; Adapter Kits; Catalog Numbers And Ratings Of T-Studs; Catalog Numbers And Ratings Of Adapter Kits - ABB Power Break II User Manual

9

T-Studs

T-Studs bolt directly to the line or load terminals of the switch.
Order one T-Stud per line or load pole. T-Stud catalog
numbers and ratings are listed in Table 7.
Cat. No. Material
Al
SP08FCA
Cu
SP08FCC
SP20FCA Al
Cu
SP20FCC
SPS20FCA Al
SPS20BCA Al
SPS25FCC Cu
SPS25BCC Cu
Cu
SPS30FCC
Cu
N/A
SPS40FCC Cu
SPS40LFCC Cu
Integral T-Studs are not removable on 3000 A back-connected
switches.
Long studs may be used in place of or alternated with
SPS40FCC if desired.
—
Table 7. Catalog numbers and ratings of T-Studs.

Adapter Kits

Adapter Kits bolt directly to the line or load terminals on the
rear of the switch. They provide proper phase-to-phase
clearances for mounting lugs or bus bars. Order one Adapter
Kit per three-phase line or load side. Lugs must be ordered
separately. Adapter Kit catalog numbers and ratings are listed
in Table 8.
Max. Switch
Frame (A) Amps Connect
800 800 Front
800 800 Front
1600 – 2000 2000
Front
2000
1600 – 2000 Front
2500 2000 Front
2500 2000 Back
2500 2500 Front
2500 2500 Back
3000 3000 Front
3000 3000 Back
4000 4000 Front
4000 4000 Front
Frame
Cat. No.
(A)
TPLUGA08
800
TPLUGA16 1600
TPLUGA20
1600–2000
Premounts in equipment, allowing cabling or bussing to
be completed before switch mounting.
3/0–800 kcmil Cu/Al wire range.
Anderson No. VCEL-075-12H1 or equivalent.
—
Table 8. Catalog numbers and ratings of Adapter Kits.
Chapter 3. Accessory Operation
Lug Odering Information
(Per Line or Load Side)
9 TPLUG108 Lugs
or 9 Crimp Lugs
18 TPLUG108 Lugs
or 18 Crimp Lugs
18 TPLUG108 Lugs
or 18 Crimp Lugs