Advertisement
Quick Links
Specialist Tool Solutions
03202500
Start / Stop
Battery & Electrical System Analyser
Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom
Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901
e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com
COPYRIGHT 2015 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED. E&OE
Advertisement
Summary of Contents for Sykes-Pickavant 03202500
- Page 1 03202500 Start / Stop Battery & Electrical System Analyser Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com COPYRIGHT 2015 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED. E&OE...
- Page 2 START & STOP Specialist Tool Solutions BATTERY & ELECTRICAL SYSTEM ANALYZER IMPORTANT - PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT TEST PROCEDURES / OPERATING INSTRUCTIONS TEST PROCEDURES / OPERATING INSTRUCTIONS IMPORTANT IMPORTANT 1. For testing 6 and 12 volt batteries, and 12 and 24 volt charging & starting systems. 1.
-
Page 3: Preparing To Test
in contact with eyes. 3. Inspect the battery for cracked or broken case or cover. If battery is damaged, do not use tester. 4. If the battery is not sealed maintenance free, add distilled water in each cell until battery acid reaches level specified by the manu Specialist Tool Solutions -facturer. - Page 4 1. Switch on the device by connecting the clamps on the battery. 2. Choose an option in the menu. QUICK START CHART 1. Switch on the device by connecting the clamps on the battery. 2. Choose an option in the menu. START-STOP BATTERY TEST SYSTEM ANALYSER...
- Page 5 6. When test is completed, the display shows the results as following 6. When test is completed, the display shows the results as following 6. When test is completed, the display shows the results as following 6. When test is completed, the display shows the results as following 6.
-
Page 6: Battery Test
BATTERY TEST BATTERY TEST BATTERY TEST 1. Press the key to select Battery Test. In this 1. Press the BATTERY TEST key to select Battery Test. In this BATTERY TEST stage, you will find the 3 tests for selection below. BATTERY TEST stage, you will find the 3 tests for selection below. - Page 7 6. When test is completed, the display shows the results as following 6. When test is completed, the display shows the results as following 6. When test is completed, the display shows the results as following 6. When test is completed, the display shows the results as following 6.
- Page 8 SYSTEM TEST SYSTEM TEST SYSTEM TEST SYSTEM TEST SYSTEM TEST SYSTEM TEST SYSTEM TEST SYSTEM TEST XX.XXV XX.XXV SYSTEM TEST 1. Press «ENTER» button, you will view the 1. Press «ENTER» button, you will view the XX.XXV SYSTEM TEST 1. Press «ENTER» button, you will view the SYSTEM TEST SYSTEM TEST SYSTEM TEST...
- Page 9 LOW CHARGING VOLTS WHEN TEST AT IDLE LOW CHARGING VOLTS WHEN TEST AT IDLE 6. Press the «ENTER» key, one of the three results will be displayed The alternator is not providing sufficient current to along with the actual reading measured. the battery.
- Page 10 9. Press «ENTER» to look for the amount of ripple from the charging 9. Press «ENTER» to look for the amount of ripple from the charging 9. Press «ENTER» to look for the amount of ripple from the charging system to the battery. One of two testing results will be displayed system to the battery.
- Page 11 (A-Z, 0-9, space & symbols). Press ENTER key to confirm and move forward to next letter. 4. Press ENTER and the display returns to BATTERY TEST. Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901...
Need help?
Do you have a question about the 03202500 and is the answer not in the manual?
Questions and answers