Using Your Refrigerator; Setting The Controls; Changing The Control Settings; Power Saving Control - Whirlpool ET16EP Use & Care Manual

Using your refrigerator
Light Switch Freezer Control
/
Refrigerator Control
Power Saving Control
Setting the controls.. .
Controls for the refrigerator and freezer are In the
refrigerator When the refrigerator IS plugged In for
the first time.
1 Set the REFRIGERA-
TOR CONTROL to 3
2 Set the FREEZER
CONTROL to B
Changing the control settings.. .
If you need to adjust temperatures In refrigerator
or freezer, use the settings listed in the chart below
Give the refrigerator time to cool down com-
pletely before adding food. (This may take sev-
eral hours )
These settings should be about right
for normal
household refrigerator usage.
The controls will be set about right when milk or
juice IS as cold as you like and when ice cream
IS firm.
l
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments
l
Then adjust the Freezer Control, if needed.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section IS
TOO WARM
QUESTIONS?
ca" your 9 If Refrigerator
sCeS)vcL~L'NE Section is
REASONS:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
[can't cycle often enough)
Controls not set correctly
for your condltlons
assistance
TOO COLD
telephone
If ICE Isn't
Heavy ice usage
number
MADE FAST ENOUGH
Very cold room temperature
@age 11).
[can't cycle often enough)
If BOTH SECTIONS
Dobr opened of ten
are TOO WARM
Large amount of food added
Very warm 01 very cold
room temperatures
RECOMMENDED CONTROL
SETTINGS:
Refrigerator
Freezer
:
Refrigerator
Freezer
3
A
Refrigerator
Freezer
Refrigerator
Freezer
Refrigerator
Freezer
Power Saving Control.. .
The Power Saving Control on the Control Con-
4m
sole operates electric heaters around the door
1 Use the "CONSUMES LESS ENERGY" setting when
openings. These heaters help keep moisture from
humidity IS low.
fuming on the outside of the refrigerator.
2. Use the "REDUCES EXTERIOR MOISTURE" setting
only if motsture forms on the outside of the
refrigerator.