general information 1. Lock: Press it to open feeder’s top cover 2. “SET” Button: - Press “SET” Button to deliver a portion of food manually. - Hold it for 5-6 seconds to reset the device to its factory settings. You should hear “DING-DONG” sound. indicator light status: - Continously on: device works correctly.
Register an account after installing the application select device Open “PetFun” application. Click “plus” icon and select Open “PetFun” application. Click “ ” button and select your device your device (No Video Smart Pet Feeder) (Video Smart Pet Feeder) www.smartpetfeeder.ca...
Make sure that your mobile device is connected to your WiFi network. 3 (a). Point QR code to feeder’s camera (10-20 cm; about a smartphone length). 3. Enjoy your Smart Pet Feeder Wait 3-5 seconds. You will hear “BEEP” sound and smartphone will automatically bind to feeder.
Page 5
feeding •• • • • • • •• • • • • • • • • • Automatic feeding Set time, when you want Choose portion size. Click “AUTO” at your pet to be fed. One portion is “Feed” page Up to 8 time points could approximately 10g.
Page 6
Event list Analyze feeding history: feed type, feeding time, etc. Remove the binding Removes binding of your smartphone and Smart Pet Feeder. My account “Push” switch feeding status or device errors. “Share” switch Allow “share bar” pop up after capturing...
5-15 mm food is not enough - Supports up to 8 devices - Smart Pet Feeder is not connected to WiFi or mobile device - Check device’s power supply - Check green light indicator. Should be on, if device is connected - Check WiFi signal.
Need help?
Do you have a question about the SMART PET FEEDER and is the answer not in the manual?
Questions and answers