Advertisement
7 Maintenance Inspections
7.1.2 Inspection after daily work ·································································
(1)
Inspecting the operation panels
Inspection: Inspect the operation of push buttons and indicators, and check
Treatment
(2)
Inspecting the scanner gantry unit and table.
Inspection: Inspect the equipment for abnormalities, such as scratches and
Treatment
7.1.3 Cleaning the equipment ······································································
(1)
Cleaning the operator console
To clean the operator console, dampen a soft cloth with a neutral detergent
(pH6.0 or more and pH8.0 or less) and gently wipe the areas that have
become soiled.
(2)
Cleaning the scanner gantry unit and table
To clean the scanner gantry unit and table, dampen a soft cloth with a neutral
detergent (pH6.0 or more and pH8.0 or less) and wipe the areas that have
become soiled.
When cleaning blood or other bodily fluids or waste from the scanner gantry
unit or table, be sure to wear disposable gloves and use ethanol to disinfect the
surfaces.
Areas 1 through 4 on the following figure indicate locations that are easily
soiled. Be sure to inspect these areas and keep them clean.
After wiping dirt away, extract enough water from the soft cloth and
immediately wipe the cleaned parts so that neither detergent nor ethanol
remains.
104
Q1E-HC0125
for abnormalities in appearance and soiling.
If any abnormalities are found, contact Hitachi, Ltd. or one of our
certified dealers to schedule a repair.
Clean any equipment that has become soiled. For more details,
see 7.1.3 Cleaning the equipment.
dents, as well as for soiling.
If any abnormalities are found, contact Hitachi, Ltd. or one of our
certified dealers to schedule a repair.
Clean any equipment that has become soiled. For more details,
see 7.1.3 Cleaning the equipment.
While cleaning the equipment, make sure that no liquids get inside. Be
particularly careful to prevent fluids from entering the gaps between the
keys and operation buttons on the keyboard and operation panel.
Do not use thinner, benzene, or other solvents when cleaning. Doing so
could damage the paint or coating.
DM# 110183 V13
Advertisement
