Table of Contents
Advertisement
Setup Instructions
5. BY MOUTH: Remove
the air valve plug and
squeeze the base of
the valve causing the
inner flap to open for
inflation.
BY PUMP: Remove
the air valve plug and
insert air pump nozzle
into the valve. The air
pump nozzle should be
inserted deep enough
to open the inner valve
flap.
Do not over inflate the
item. Once the item is
completely inflated,
then insert the air valve
plug to seal it shut.
NOTE: Fill inflatable with
air until it is firm and solid.
If there is any straining at
the seams, the item is
over inflated. If any seam
begins to strain,
immediately stop inflation
and release air to reduce
the pressure until all signs
of stress on the inflatable
are gone. DO NOT use
the inflatable if there is
straining at the seams.
Use of an over-inflated
item may result in serious
injury, paralysis or death.
Inspect this product for
rips, tears or punctures.
Do not use if damaged.
6. The flexible tubing from
the water blaster
should be inserted into
the hole of each float
so that it submerses in
the water.
4 BANZAI 01452 20121227
5.
6.
OR
OR
Advertisement
Table of Contents
