ICAS IFP-2.32 Manual

19.04.2013
ICAS FIRE PANEL IFP–2.32
1) DESCRIPTION
IFP-2.32 is a microprocessor controlled Fire
Panel with 2 loops intended either for privat
Homes & Apartments or larger installations.
The two loops are balanced by
resistor mounted at the last detector in each
loop. The device is named as IFP-Y.X, where
Y describes number of loops and X number of
detectors in the loop. IFP-2.32 can handle 32
detectors of standard 12V Icas detectors type
500-IDx or Icas type CHOR-E (9V) in each
loop.
Connection of Detectors:
- 500-IDx detectors
sirene but the sirene are triggered from
the Fire Panel. A 4 wire solution is used
to activate the integrated sirene. An external siren can also be used. The siren is con-
trolled by the
al siren control.
- CHOR-E detectors (9V detector) can be connected only "Alarm in one Alarm in all"
function.
The different functions are chosen by use of jumper.
The IFP-2.32 is supplied by 230V AC and the internal backup
equipped with one internal siren, fault relay, alarm relay and 2 open collectors, each for one
loop. The IFP-2.32 is controlled by 4 underlighted pushbuttons. In the IFP-2.32 is possible to
control each loop separately by the functions for Switch OFF/ON loops, also Switch OFF/ON
the Test of loops, remove Alarm and Fault in loops. The IFP-2.32 includes also complete
functions for battery testing and firmware testing.
When the Alarm is triggered, the internal siren of IFP-2.32 and siren of detectors / External
sirenes can be silenced with pushbutton SIREN. This will stop the sirens of detectors. Remov-
ing of Alarm and other control functions are described in chapter Button Functions.
___________________________________________________________________________
ICAS AS
IFP-2.32 Manual
2k7 Ohm
have integrated
IFP-2.32 Fire Panel. The alarm relay of
salg@icas.no
IFP-2.32
12V/0,8Ah.
1
can be used for extern-
The IFP-2.32 is
www.icas.no