Bluerock Tools SL-1.25 Operational Manual

Seam locker

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

Volume

1.0

OPERATIONAL MANUAL

MODEL: SL-1.25 SEAM LOCKER

by BLUEROCK ® Tools

Table of Contents

Need help?

Do you have a question about the SL-1.25 and is the answer not in the manual?

Questions and answers

Summary of Contents for Bluerock Tools SL-1.25

Page 1 Volume OPERATIONAL MANUAL MODEL: SL-1.25 SEAM LOCKER by BLUEROCK ® Tools...
Page 2 S L - 1 . 2 5 S E A M L O C K E R UNPACKING THE ITEM Caution: This machine is packed together with items that may be sharp, oily and overly heavy objects. Remove the machine from the packaging in a safe manner.
Page 3: Table Of Contents
S L - 1 . 2 5 S E A M L O C K E R Table of Contents SAFETY PRE-OPERATIONAL SAFETY CHECKS OPERATIONAL SAFETY CHECKS SPECIFICATIONS INCLUDED ACCESSORIES ADDITIONAL AVAILABLE ACCESSORIES BLUEROCK ® T ’ DDITIONAL ACCESSORIES FOR THIS MACHINE MAY BE FOUND IN OOLS ONLINE SHOP AT BLUEROCKTOOLS...
Page 4: Safety
Chapter S L - 1 . 2 5 S E A M L O C K E R Safety DO NOT USE THIS MACHINE UNLESS YOU HAVE READ THE OPERATING INSTRUCTIONS! Safety glasses must be worn at all times in Long and loose hair must be work areas.
Page 5 S L - 1 . 2 5 S E A M L O C K E R Ø DO be mindful that power tools can expose an operator to vibrations transmitted trough contact with the machine. Prolonged exposure can lead to medical issues which should be discussed with a medical professional. Ø...
Page 6: Specifications
S L - 1 . 2 5 S E A M L O C K E R Chapter Specifications ELECTRICAL DATA Voltage 120V, 60Hz Current 11.6 Amps Motor Size 1400W Power Connection US Standard Type Plug Protective Insulation Class II MECHANICAL DATA Lock Capacity 0.8mm –...
Page 7: Operations
Note THOROUGHLY READ THROUGH THE ENTIRE MANUAL BEFORE OPERATING THIS MACHINE! PURPOSE Ø The purpose of the SL-1.25 Seam Locker is to close Pittsburgh lock joints on correspondingly pre- machines workpieces, e.g. ventilation ducts, housings, containers, etc. OPERATIONAL PRINCIPLES Ø...
Page 8: Machine Components
MACHINE COMPONENTS Ø The main components of the SL-1.25 are the head assembly, gearbox, motor, housing and main handle. The head assembly is driven by the gearbox and the motor. These components must be not be removed except by a qualified technician. Power must be disconnected prior to any service.
Page 9 S L - 1 . 2 5 S E A M L O C K E R Adjustment Lever Guide Rail On/Off Switch 30 Deg. Drive Roller Gearbox 75 Deg. Drive Roller Support Roller Roller Ø The clearance between the rollers and the guide rail can be locked into place using the adjustment lever. This is used to place the machine into position prior to use (at the beginning of the channel) and take the machine away from the workpiece after use (at the end of the channel).
Page 10: Running The Machine
S L - 1 . 2 5 S E A M L O C K E R § • NOTE: No adjustments are used for sheet thickness. The machine will automatically adjust itself depending on the sheet thickness as long as it’s within machine’s specifications.
Page 11 S L - 1 . 2 5 S E A M L O C K E R CAUTION: Only lay the machine down on surface once the turning parts have come to a complete stop. Ø Depending on the construction of the channel to be locked, the seam locker can be used in 2 different ways: “Open Channel”...
Page 12 S L - 1 . 2 5 S E A M L O C K E R • • 3) Switch machine on and place at the begging of the channel. The curved guide rail on the machine ensures an easy placement of the machine at the beginning of the channel.
Page 13: Transporting The Machine
S L - 1 . 2 5 S E A M L O C K E R • 2) Move lever into position against the channel with the lever in the open position (away from the direction of feed) • 3) Set the machine up against the prepared material on the channel.
Page 14: Troubleshooting
S L - 1 . 2 5 S E A M L O C K E R Chapter Troubleshooting Note SERVICING SHOULD ONLY BE DONE BY A QUALIFIED TECHNICIAN. DON’T FORGET TO UNPLUG POWER TO UNIT PRIOR TO SERVICE! PROBLEM SOLUTION Motor does not turn on.
Page 15: General Maintenance
S L - 1 . 2 5 S E A M L O C K E R Chapter General Maintenance Ø Inspect electrical cords and electrical connections. Ø Keep machine clean and free of debris. Clean motor ventilation slots as necessary. Ø...
Page 16: Parts List
S L - 1 . 2 5 S E A M L O C K E R Chapter Parts List 1 Support floor 25 Key 49 Adjusting nut 2 screw 26 Gear 50 screw 3 30°Left Driving wheel 27 Bearing 51 Bearing 4 75°Left Driving wheel 28 Gear...
Page 17 S L - 1 . 2 5 S E A M L O C K E R...
Page 18: Breakdown View
S L - 1 . 2 5 S E A M L O C K E R Breakdown View...