Table of Contents
Advertisement
Solving
common
ice maker/dispenser
problems
PROBLEM
CAUSE
SOLUTIONS
Ice dispenser
l
Freezer door open
l
Close the freezer door.
won't work
l
Ice bin not properly
l
Make
sure bin is pushed in all the
way.
installed
l
Wrong ice in bin
l
Use only crescents from ice maker.
Shake the bin occasionally
to keep cubes
separated and to increase storage room.
l
Dispenser not used for
l
Dump oki ice and make a new supply.
extended periods,
causing ice cubes to
melt together
Ice dispenser
l
Ice dispenser bar held
l
Wait about 3 minutes for the dispenser
stops working
in too long
motor to reset.
l
Large amounts of ice shouti be taken
from the bin,
not through the dispenser.
Off-taste or
odor in ice
l
Ice attracts airborne
odors; old ice
l
Water quality
l
Foods not properly
wrapped
l
Ice bin and freezer may
need cleaning
l
Plumbing to ice maker
l
New ice maker
l
Dump old ice and make a new supply.
Store excess ice in covered container.
l
Water containing
minerals (such as sulfur)
may require a filter to remove.
l
Wrap properly. See pages
22
and
23.
l
Clean freezer and ice bin. See cleaning
chart on pages 19 and 20.
l
Follow Installation
Instructions for proper
ice maker water supply hook up. (See
back of refrigerator cabinet.)
l
The first few loads of ice from a new ice
maker may have an off-taste. Dump ice
and make a new supply.
15
Advertisement
Table of Contents
