Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for PNI OV288
Summary of Contents for PNI OV288
- Page 1 User manual Car alarm PNI OV288...
- Page 2 FUNCTIONS DESCRIPTION Reinforcement: Turn off the car engine and exit it. Press the button on the remote control, the signal lights will blink once, the siren will ring once, the doors will automatically lock. After 5 seconds, the indicator light will blink, the system enters the arming mode Disarm: In armed mode, press the button on the remote control, if the car alarm is in the voice reinforcement mode, the siren will ring twice, the position lights will blink 3 times, if the...
- Page 3 9. Emergency Disarm: When the system is armed, if you have lost the remote control or you can not disarm the system, you can disarm by opening the key in the key, start the engine, then press the reset button once, so the system will be deactivated . 10.
- Page 4 18. Identification of the area where the alarm is triggered (will reset at start of the engine) Area Sounds from the siren Lights Car door Sensor Contact car startup 19. Programming a Remote: Fit the system control unit and then open a door b) Turn the unit off for 6 consecutive times and then turn it on.
- Page 5 Installing and setting the shock sensor We suggest installing the shock sensor near the door or near the panel after installing the main unit to easily detect any intrusion. Set the shock to 5 seconds after closing the doors to check if the shock sensor is sufficiently sensitive.
- Page 6 DIAGRAM OF CONNECTIONS...
- Page 7 CONNNECTION DDIAGRAM FOR CENTRALIZED CLOSURE...
Need help?
Do you have a question about the OV288 and is the answer not in the manual?
Questions and answers