Advertisement
Quick Links
ASSEMBLING YOUR AQUA LANTERN SOLAR LIGHTED BUOY
STEP 2
Locate the four threaded holes on the bottom
of the buoy. Using a Flathead screwdriver, attach
the flanged anchor bracket to the bottom of the
buoy using the screws provided. CAUTION: Do
Not Over-Tighten Mounting Screws!
58 C hes terfield Drive Nobles ville, Indiana 46060 www.aqualantern.com
STEP 1
Remove the box contents and locate the flanged anchor
bracket and four mounting screws. 4 AA rechargeable
batteries are included and have been installed at the
factory.
R R F orres t C ompany
.
.
Page 1
Advertisement
Summary of Contents for R.R. Forrest AQUA LANTERN
- Page 1 ASSEMBLING YOUR AQUA LANTERN SOLAR LIGHTED BUOY STEP 1 Remove the box contents and locate the flanged anchor bracket and four mounting screws. 4 AA rechargeable batteries are included and have been installed at the factory. STEP 2 Locate the four threaded holes on the bottom of the buoy.
- Page 2 STEP 4 Use proper hardware and tethering equipment for safe anchoring of your Aqua Lantern. ATTENTION: Anchoring hardware and equipment are not included. CONGRATULATIONS! NOW YOU CAN LIGHT UP THE LAKE! YOUR AQUA LANTERN IS READY FOR USE. Page 2...
- Page 3 CHANGING BATTERIES Uses (4) AA, 1.2V, Ni-Mh (Nickel-Metal hydride) rechargeable batteries. Ensure replacement batteries (not included) are fully charged prior to installation. Always follow battery manufacturer's instructions to insure the longest life of your store brand batteries. STEP 1 At least every two years you will need to replace your rechargeable batteries in the buoy's solar generator.* To replace the batteries, you will first...
- Page 4 ATTENTION: If you live in a region where the outside temperature reaches a sustained 35 degrees in the winter months, we recommend that you remove the Aqua Lantern from the lake and store it in a warm dry place until spring. For additional information, visit "www.aqualantern.com"...