Rambler Wheels X2LT Installation Instructions

All Terrain Wheel System
Rambler X2
lt
Works with YETI Tundra
Coolers 35 thru 65.
T
elescoPing
s -g
witch riP
H
andle
s
hort
ss c
s
traPs
2. Drop the YETI Cooler down onto the
wheel bracket (drain plug side)
with the long strap stretched out
under the cooler in the pattern
from step 1.
Keeping the strap free of slack,
make sure the cam buckle is
positioned no more than 2 inches
from the cooler.
TWO A
xle
P
ositions
c c
ooler ushion
r b
ubber umPers
NEVER FLAT
a -t
& l
ll errain
ong
w
b
heels
am uckle
2"
3. Now, moving to the other side of
the cooler, thread the short strap
down through the integrated tie
down slot of the cooler to the wheel
bracket and back up through the
cam buckle, but do not tighten.
Check out our videos on YouTube for more information
and instruction on installing and using your Rambler.
1. Weave the long strap through the holes in the wheel bracket in
this pattern, avoiding twists, with the cam buckle facing down.
Notice the proper way to
thread the cam buckles.
4. Back to the other side of the
cooler, pull down the knots of
the rope handle.
Made in the
USA