Taking Measurements - MX3 Hydration Testing System User Manual

Taking Measurements

Use the scroll buttons to
1
highlight APP and press
Select.
Ensure Bluetooth is enabled
3
on your phone or tablet.
Open the MX3 App and tap
the icon or the Take a
Measurement button to initiate
a measurement.
Result will be displayed on both
5
the LAB and the MX3 App.
12
*See Page 17 (Sample Collection Tips)
Follow the prompts to connect
2
your MX3 LAB to the MX3 App.
Insert a Hydration Test strip.
4
Swallow saliva in mouth
and generate fresh saliva.*
Tap the tip of the test strip
against the saliva sample at an
approximately 30° angle until a
tone sounds.
30°
6 Press the Eject Button to eject
the test strip.
Local Measurements
The MX3 LAB may also be used in LOCAL
mode to take measurements without using
the App. LOCAL mode measurements are not
recorded or stored in the App or the device
itself, but allows readings to be made when
a smartphone/tablet is unavailable. To take a
measurement in LOCAL mode, turn on the MX3
LAB, scroll to highlight LOCAL, press
follow the process for taking a saliva sample.
The reading will be displayed on the screen.
FAQs and Troubleshooting
For FAQs and Troubleshooting guides visit
mx3diagnostics.com/resources
Select and
13