Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for NATI SPEEDWAY 07637
- Page 1 Air Ratchet Model: 07637 *Actual product may vary slightly 88007637 02/2014...
-
Page 2: Specifications
Important Operating Instructions CALIFORNIA PROPOSITION 65 WARNING: You can create dust when you cut, sand, drill or grind materials such as wood, paint, metal, concrete, cement, or other masonry. This dust often contains chemicals known to cause cancer, birth defects, or other reproductive harm. -
Page 3: General Safety Instructions
Important Operating Instructions GENERAL SAFETY INSTRUCTIONS • Keep the work area clean and well lit. Cluttered and dark areas increase the risk of electric shock, fire, and injury to persons. • Do not operate the tool in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. - Page 4 Important Operating Instructions GENERAL SAFETY INSTRUCTIONS • Risk of electric shock. This tool is not provided with an insulated gripping surface. Contact with a “live” wire will also make exposed metal parts of the tool “live” and shock the operator. •...
-
Page 5: Specific Safety Instructions
Important Operating Instructions GENERAL SAFETY INSTRUCTIONS • Tool service must be performed only by qualified repair personnel. • When servicing a tool, use only identical replacement parts. Use only authorized parts. • Use only the lubricants supplied with the tool or specified by the manufacturer. •... -
Page 6: Vibration Precautions
Important Operating Instructions VIBRATION PRECAUTIONS This tool vibrates during use. Repeated or long-term exposure to vibration may cause temporary or permanent physical injury, particularly to the hands, arms, and shoulders. To reduce the risk of vibration-related injury: 1. Anyone using vibrating tools regularly or for an extended period of time should first be examined by a doctor and then have regular medical check-ups to ensure medical problems are not being caused or worsened from use. - Page 7 Important Operating Instructions controls the air supply even if the air hose is ruptured. The shut-off valve should be a ball valve because it can be closed quickly. Note: if an automatic oiler system is not used, add a few drops of pneumatic tool oil to the airline connection before operation.
-
Page 8: Work Area Set-Up
Important Operating Instructions WARNING: Read the ENTIRE important operating instructions before set-up or use of this product. Inspect tool before use, looking for damaged, loose, and missing parts. If any problems are found, do not use the tool until it has been repaired. TOOL SET-UP WARNING: To prevent serious injury from accidental operation, turn off the tool, detach the air supply, safely discharge any residual air pressure in the tool, and release the trigger... - Page 9 Important Operating Instructions 4. There must not be hazardous objects (such as utility lines or foreign objects) nearby that will present a hazard while working. OPERATING INSTRUCTIONS NOTE: For additional information regarding the parts listed in the following pages, refer to the DIAGRAM and PARTS LIST at the end of this manual.
-
Page 10: Storage And Maintenance
Important Operating Instructions STORAGE & MAINTENANCE WARNING: Procedures not specifically explained in this manual must be performed only by a qualified technician. To prevent serious injury from accidental operation, turn off the tool, detach the air supply, safely discharge any residual air pressure in the tool, and release the trigger before performing any inspection, maintenance, or cleaning procedures. - Page 11 Air Supply Set-up...
-
Page 12: Troubleshooting Guide
Important Operating Instructions TROUBLESHOOTING GUIDE Symptom Possible Cause(s) Corrective Action There is grit or gum in the Flush the tool with air tool oil or gum solvent tool The tool is out of oil Lubricate the tool according to instructions Adjust the regulator on the tool to the maximum setting The air pressure is low... -
Page 13: Warranty
To receive service under warranty, the original manufacturer part must be returned for examination by an authorized service center. Shipping and handling charges may apply. If a defect is found, NATI will either repair or replace the product at its discretion. - Page 14 PARTS LIST Air Ratchet Model: 07637 88007637 02/2014...
- Page 15 PARTS LIST Model: 07637 Air Ratchet Description QTY. Description QTY. Drive Bushing Housing Ratchet Yoke Air Inlet Cylinder Actuation Pin Rotor Throttle Lever Rotor Blade Front Plate Valve Stem Bearing O-Ring End Plate Spring Bearing Valve Plug Washer Washer O-Ring Spring Thread Ring Gear Lock Pin...