Download Print this page

Elflex IRAS-RC Instruction Manual

Hide thumbs

Available languages

INSTRUCTION MANUAL

Model no.: IRAS-RC

Table of Contents

Need help?

Do you have a question about the IRAS-RC and is the answer not in the manual?

Questions and answers

Summary of Contents for Elflex IRAS-RC

Page 1 INSTRUCTION MANUAL Model no.: IRAS-RC...
Page 2 ASSEMBLE & OPERATION INSTRUCTION Please read carefully and Save this instruction for future reference Advarsel LES NØYE - Den infrarøde varmeren er designet for sikker bruk. Ikke desto mindre kan installasjon, vedlikehold og drift av varmeren være farlig. Hvis du følger følgende prosedyrer, vil du redusere risikoen for brann, elektrisk støt, personskade og holde installasjonstiden til et minimum.
Page 3 18. Hvis strømledningen er skadet på noen måte, må den byttes ut av produsenten eller dens serviceagent eller en tilsvarende kvalifisert person. 19. For å forhindre overoppheting av dette apparatet, må du renholde det regelmessig. Holdes fri for alt som kan forårsake blokkering.
Page 4 ASSEMBLY INSTRUCTIONS Tools Needed: * Pencil *Hammer *Level *Screw Driver *Power Drill and drill bit A wall mounting bracket is provide with the heater which has been specifically designed to allow this product to be fitted to a wall or ceiling before drilling the holders for the wall/ceiling is solid and that there are no hidden water pipes or electric wires. The heater must be installed no less than 16’’...
Page 5 The heater must be installed at least 1.8 m above the floor...
Page 6 Stand installation –(optional) Noted: accessories are packed in stand carton box FUNCTION & OPERATION 1. PLUG the unit into a plug socket, make sure the power supply is the same as rated 2. PRESS the power button on the right side of heater 3.
Page 7 Decrease Heat Level or Turns heater on to Timer Hours Level 4 (Maximum) Enable Heat Level L [n] adjustment Enable Timer adjustment [0H]-[24H] 0-24 1. POWER BUTTON: Turn the heater off. 2. UP BUTTON: Increase timer and level. 3. DOWN BUTTON: Decrease timer and level. 4.
Page 8 E2 Error on Display: Tip over function, Make heater less than 60°working angel and restart heater L1,L2, shows in display, but no heat bulb is damaged. Arrange for replacement bulb with local Dealer Norsk importør: Konsulent Team as Håndverksveien 2 2069 Jessheim e-mail Post@elflex.no Telefon 63942680...