Aura Light Sorbus Instruction Manual

INSTRUCTION MANUAL
Model : Aura Sorbus
Connecting Joint
DC Socket—
Plastic Nuts
The lampshade is able to rotate at angles shown above and the
connecting rod can be adjusted up and down.
OPERATING INSTRUCTION
7. The lamp is designed to operate on 220 V-240 V—50/60Hz current only
2. Adjust the height of the connecting rod by using a sultable coin to turn and loosen/
- - —
tighten the lampshade/connectingjoint.
3. Connect the power supply connector to the DC socket and power supply plug to the
wallsocketoutlet.Switch on the wallsocketoutletswitch.
4. Touch Sensor Control Panel:
(1) Controls operation ofthe lamp just bya touch.
(2) Turn On orOffthe lamp.
(3)
-
.-
Brightness leve! can be adjusted by Ute dimming function.
(4) Each lighting mode
(j
working, ca Reading,
Co[fee and C Sleeping) has its own
unique pre-set leve! of brightness and colour temperature.
(5) Lighting Colour Tone:
a. Cool White
-
Working Mode and Reading Mode
b. Warm White
-
Cottee Mode and Sleeping Mode
(6) Lighting Memory Function: When the lamp is switched on each time, it wiIl always operate at the same
mode/brightness set [rom itslastprevious operation.
Lampshade Joint—_
Lampshade
Light source
—
Connecting Rod
USB Charge
Touch Sensor
Control Panel
Base
I Working rnode
re Reading model
Coffeemodel
C Sleeping model
More bfightness
Jens brightness
0 Switch
LAMP ROTATING FUNCTION
\