Offline Update; Start Calibration; Update Device-Time; Get The Pn Code - Haiwell HMI Series User Manual

www.haiwell.com
upload password]; if the project don't have to set up the upload password, no pass word is required here;
Step 3: click [ upload ], wait for the pop-up prompt " upload successful!", click [OK], running the project of device in PC.
 Offline update
Step 1: click [offline update],choice firm package, click [open], The latest firmware update package can be downloaded from
Haiwell official website http://en.haiwell.com/daruanjianen/HMI_Update_V2.17.1.5.hmi
Step 2: enter offline update confirm interface, click [update]
Step 3:waiting for update to complete, pop-up prompt " update success", click [OK].
 Start calibration
Click [ start calibration ],the device enter the calibration interface, press the calibration mark
time, and enter next calibration site, calibration the device touch the screen in order of "left, right, up, down, mid"
 Update device-time
Click [update device time], can to update system time of device. When update to complete, you can device-time, device -time
and system time of PC are same.
 Get the PN code
Click [get PN code], can to view the current PN code of device.
 Check the device version
10 / 28
Haiwell IoT Cloud HMI User Manual
1above the screen for long