Park Air Systems T6TR User Documentation page 28

Table 2 Headset/Microphone/Diagnostics Connector - PC Connections
Pin
Signal
Number
2 Transmit data
4 Receive data
7 Ground
Rear Panel Power Switch
The rear panel's power switch is a 2-way rocker switch used to select between power on, and standby.
WARNING
When the Power Switch is set to the Standby position, dangerous voltages are still present
in the transceiver's internal power supply circuitry. To ensure safe working, the transceiver
must be isolated from the ac and dc input supplies.
= On
T6TR VHF 50 W Transceiver
Input or
Output
Output RS232, 115200 baud, 8 data bits, 1 stop bit, no parity, no
handshaking.
Input RS232, 115200 baud, 8 data bits, 1 stop bit, no parity, no
handshaking.
- 0 V.
Dangerous Voltages
Page 4
Description
= Standby
Back to Transceiver
Main Page
Operation