Summary of Contents for Maripak COMPACK i Series
- Page 1 Инструкция и каталог запчастей Maripack Compack-i 5800 SHRINK WRAP MACHINES for compack-i series Tel: +78123632021 info@rospol.com www.rospol.com...
-
Page 3: Table Of Contents
Table Of Contents Certificate of conformity Service inquiries Warranty Safety information Contents of your package Your machine Mounting the legs Control panel Getting prepared Loading the film Sealing Shrinking Magnetic hold down Periodic care Technical specifications Maintenance Troubleshooting Spare part Electrical diagram... - Page 4 EC Decleration of Conformity According to EC Machinery Directive 89/392/EEC , Annex II A We herewith declare, as that the following described machine in our delivered version complies with the appropriate ba- sic safety and health requirements of the EC Machinery Directive 89/392/EEC based on its design and type, as brought into circulation by us.
-
Page 5: Service Inquiries
Service Inquiries In case of damage or a service requirement, please contact to your nearest authorized distributor or to the manufacturer company addressed. MARİPAK Packaging Ltd. Warranty This machine is under the warranty of the manufacturer for a period of one year beginning with the date of delivery. -
Page 6: Safety Information
• If the consumable parts are demanded or there is a problem related to any consumable part as described below: Consumable parts: Cutting blade, rubber, teflon tape, blade beds and its corner and side connections. • If the machine is not used as described in this manual, •... -
Page 7: Contents Of Your Package
Contents Of Your Package Please make sure that you have received all the items listed in the following table with your pack- age. Operating and instructions manual 1 Pcs Main unit 1 Pcs Conical film holders 2 Pcs Film holder bar 1 Pcs Teflon tape 1 Pcs... -
Page 8: Mounting The Legs
Mounting The Legs The outlook of the table and the mounting is shown in the following figures. Figure 3 Figure 2 Control Panel The control panel of the machine is shown in the figure below. ON-OFF switch, Digital controller unit Legends 1. -
Page 9: Getting Prepared
Getting Prepared Loading Film To take out the holders, first remove the film holder bar and then unscrew the conical holders. After one of the sides is fixed, insert the film roll on the bar and screw back the conical head to fix on the roll, as shown in figure 5. -
Page 10: Shrinking
Figure 6 Figure 7 The film and the product must be positioned together close to the front-right corner of the cham- ber. There must be 1-2 cms of distance between the edge of the chamber and the product. Close the hood to cut the edges (Figure 6). A small amount of film will be wasted. IMPORTANT NOTE: To avoid wasting film, you should choose the correct size of film. -
Page 11: Periodic Care
Periodic Care WARNING: Unplug your machine before any periodic care. Damage may occur to the acrylic cover if left closed. This will also void your warranty. The fan chamber in the machine should be checked frequently and any kind of dirt and scrap should be removed. -
Page 12: Technical Specifications
Technical Specifications Machine weight Consump- Packed Max. Available Power tion Machine dimensions dimensions Models Chamber sizes film series* supply (Max/ axbxcxdxe (mm/inches) axbxcxdxe width Crated Average) (mm/inches) 230V, COMPACK 4500-i 450x320x250mm 400mm 80 kg 112 kg 1085x615x1135x865x270 1200x800x800 15 Amps 3,4/1,9kW Code: Y12 001 1022 17”x13”x9”... -
Page 13: Maintenance
Maintenance Replacement of the cutting blade Cutting blade can be broken in time. In order to change it, follow the steps below; CAUTION: For your safety unplug your unit before any service action. And make sure if the cutting blade is cooled down. - Page 14 • Check if the ROOM temperature set value is set to low (Figure 4). If the unit does not cut • Check if the cutting blade is broken. If so, change it with the spare one as described in this ma- nual (Figure 8).
-
Page 15: Spare Part
Spare Parts Part Code Label Part Name model 4500 model 5800 model 7000 Y01 007 0001 Y01 007 0001 Y01 007 0001 Casters with locker EP01 ZKC 075 F Y01 007 0011 Y01 007 0011 Y01 007 0011 Casters EP01 ZKC 075 Y01 010 0011 Y01 010 0011 Y01 010 0011... - Page 16 Part Code Label Part Name model 4500 model 5800 model 7000 Y01 006 0002 Y01 006 0002 Y01 006 0002 Left blade holder casing (long) Y11 006 0610 Y11 006 0610 Y11 006 0610 Torsion bar cube Y11 001 3400 Y11 001 3400 Y11 001 3400 Left-right blade holder ST&MG (w=24,5mm)
- Page 17 з о� 2х20А F1 220 V _______, ,----- - - - - - - - � - - - - - - - - ..- - - - - - - - - - - - -------------------- .-- - - - 220V А...
- Page 18 LAYOUT Е ПТLЕ PRODUCТ INDEX У11 002 0060 А4 AnENТION:nllS DOCUMENT Drawnby Edition / Date CONTAINS PROPRIEТARY DATA OF MARIPAK С/ 15.01.2010 Date 29.01.2007 NO DISCLUSURE,REPRODUCПON Scale СОМРАСК i СРО1 OR USE OF ANY PART OF ntlS Checked GIDA END.MAM.SAN.TIC.LТD.STI.
- Page 19 Packaging & lndustrial Equipment Ltd...
Need help?
Do you have a question about the COMPACK i Series and is the answer not in the manual?
Questions and answers