Download Print this page

Advertisement

Quick Links

READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
It is recommended that two people handle and assemble the item.
Assemble in the room of use.
To avoid damages assemble the item on a soft, clean surface
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the item as this will damage the base.
Always lift the item with two people to reposition.
Keep any sharp objects away from the item.
This product is manufactured in pine which is a wood with natural characteristics including knots, grains,
clusters or indentations.
On unpacking the item you may notice an odour due to production processes but this will disappear after a
period of time.
DO NOT place the item next to a radiator or direct sunlight – this item is susceptible to temperature change.
It is recommended an even room temperature be maintained with no sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item as marking will occur
For general cleaning use a duster or damp cloth (almost dry) not wet – do not use soap and water,
detergents, aerosol sprays or any polish as use of these materials would invalidate any claims.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.
m
0 m
9 3
ASSEMBLY INSTRUCTIONS
PANAMA SIDEBOARD
IMPORTANT
YOUR PANAMA SIDEBOARD.
HEALTH & SAFETY:
CARE & MAINTENANCE:
4 0
5 m
m
www.lassic.co.uk
4 m
Page 1 of 12

Advertisement

loading

Summary of Contents for Lassic Casa Vida PANAMA SIDEBOARD

  • Page 1 For general cleaning use a duster or damp cloth (almost dry) not wet – do not use soap and water, detergents, aerosol sprays or any polish as use of these materials would invalidate any claims. DO NOT place the item onto wet or damp flooring as staining may occur to the floor. www.lassic.co.uk Page 1 of 12...
  • Page 2 Page 2 of 12...
  • Page 3: Parts List

    PARTS LIST HARDWARE LIST Part Item Part Item Top Panel Wooden dowel Right Panel 14mm Screw Left Panel 30mm Screw Base Panel 30mm Screw Shelf panel 35mm Screw Back panel 19mm Bolt Spine Handle Right Front Frame Left Front Frame Door Hinge Front Frame Clip...
  • Page 4 Step 1: Insert the right panel (2) to the right front frame (8) making sure the parts are pushed together and lined up. Place the cleats (23) between the marks shown and secure using hardware part D and a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim.
  • Page 5 Step 3: Insert hardware part A using a small mallet (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim 2 and Step 4: Connect the back column (20) to the middle drawer runner (19) using hardware part E and a screwdriver (not provided).
  • Page 6 Step 5: Connect the front frames (10) and centre front frame (11) to the small vertical frame (12) and vertical frame (13). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 6: Attach the left panel (3) to the front frame section. DO NOT use any power tools as this may damage the frame and will invalidate any claim.
  • Page 7 Step 7: Attach the base panel (4) using hardware part E and a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Attention: Step 8: Attach the right panel (2) using hardware part E, then attach hardware part M using hardware part B. You will need to use a screwdriver (not provided).
  • Page 8 Step 9: Attach the top panel (1) using hardware part E and a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 10: Attach the side drawer runners (22), back column (20) and middle drawer runner (19) using hardware part E and a screwdriver (not provided).
  • Page 9 Step 11: Attach the cross rails (21) to the doors (14) using hardware part D. Attach hardware part H to the doors using hardware part B. You will need to use a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 12: Attach hardware part G to the doors (14) using hardware part F and a screwdriver (not provided).
  • Page 10 Step 14: Attach hardware part J to the base panel (4) using hardware part B. Insert hardware part K and push the doors shut against them to mark the wood. Secure hardware part K to the doors (14) using hardware part B. You will need to use a screwdriver (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim.
  • Page 11 Step 16: Join together the back panels (6) with the spine (7) and attach to the frame using hardware part N and a small mallet (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Step 17: Assemble the drawer components using hardware parts C, F and G with a screwdriver (not provided).
  • Page 12 Step 18: Insert the assembled drawers and secure using hardware part A and a small mallet (not provided). DO NOT use any power tools as this may damage the frame and will invalidate any claim. Additional Information If you have any issues with your item please contact the retailer directly you purchased it from who will be able to resolve any issues.