Turn The Device On And Off; Reset The Device - LG KS20 User Manual

GETTinG STArTEd
Turn the device on
and off
To turn on the device, press the
PoWEr button. When you turn
on the device for the first time,
you are asked to complete a
calibration process. for more
information, see "Calibrate the
device" on next page.
To turn off the device, press
P again.
Note
P
v Pressing turns off your device
temporarily and switches the
device to sleep mode. However,
you can still receive messages and
calls while your device is in the
sleep mode.
12
KS20 Open UK_축(홍콩합본용12

reset the device

occasionally you may need to
reset your device. A normal (or
soft) reset of your device clears
all active program memory and
shuts down all active programs.
This can be useful when the
device is running slower than
normal, or a program is not
performing properly. A soft
reset is also necessary after the
installation of some programs.
if a soft reset is performed when
programs are running, unsaved
work will be lost.
To perform a soft reset
• re-attach the battery and
press the PoWEr button on
the right side of your device.
The device restarts and
displays the Today screen.
12
To perform a hard reset
• Press and hold both
buttons(Send+volume down)
shown enclosed by circles in
the picture below. Keep these
keys pressed, and at the same
time, press the PoWEr button
on the right side of your
device. And hold both buttons
for a while (about 10 seconds).
2008.2.26 3:37:45 PM