Toro 30104 Installation Instructions

Bagger Adapter Kit
Model 30104 Bagger for 36in GrandStand
Model No. 121-7515
This product contains a chemical or chemicals known to the State of California to
Installation
Loose Parts
Use the chart below to verify that all parts have been shipped.
Description
Adapter
Lock nut (1/4 inch)
Bolt (1/4 x 3/4)
Lock nut (3/8 inch)
Bolt (3/8 x 2-1/2 inches)
Installing the Adapter
1. Install the adapter to the bagger-back plate with 3 bolts
(1/4 x 3/4) and lock nuts (1/4 inch).
3
1 2
1. Bolt (1/4 x 3/4)
2. Adapter
2. Install the mounting bracket to the adapter with the
bolts and nuts provided with the bagger.
© 2014—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Proposition 65 Warning
cause cancer, birth defects, or reproductive harm.
4
g026792
Figure 1
3. Bagger-back plate
4. Lock nut (1/4 inch)
Register at www.Toro.com.
WARNING
CALIFORNIA
Qty.
1
3
3 Install the adapter.
1
1
3. Install the bagger clamp to the bagger and adapter with
a bolt (3/8 x 2-1/2 inches) and lock nut (3/8 inch).
1 2
1. Bolt from bagger
2. Mounting bracket
3. Bagger-back plate
4. Lock nut from bagger
Form No. 3373-995 Rev A
® Mower
Installation Instructions
Use
4
3
7 6
Figure 2
5. Bolt (3/8 x 2-1/2 inches)
6. Bagger clamp
7. Lock nut (3/8 inch)
Original Instructions (EN) All Rights Reserved *3373-995* A
Printed in the USA.
5
g026815