Table of Contents
Advertisement
Installing
it properly
1.
Allow 1.25 cm (lh inch) space on each
side and at the top of the refrigerator for
ease of installation.
2. If the hinge side of the refrigerator is to be
against a wall, you might want to leave
extra space so the door can be opened
wider.
3. The refrigerator can be flush against the
back wall.
Leveling
it
Your refrigerator has 2 front leveling
screws - one on the right and one on the
left. To adjust one or both of these, follow
the directions below.
1. Remove
base
grille. (See page 19.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclock-
wise.
4.
Check with level.
5. Replace base grille. (See page 19.)
Right to
7
Advertisement
Table of Contents
