Advertisement
Instruction manual
• Do not touch a ruptured and/or leaking
battery. If the liquid from the battery gets into
your eyes, rinse your eyes as soon as
possible with clean water, without rubbing
your eyes. Immediately go to the hospital. If
it is not treated properly, it can cause eye
problems.
BEFORE THE FIRST USE
•
Take the appliance and accessories out the box. Remove the
stickers, protective foil or plastic from the device.
•
Before using your appliance for the first time, wipe off all
removable parts with a damp cloth. Never use abrasive products.
•
Place the device on a flat stable surface and ensure a minimum
of 10 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
•
Plug the power cable into a 13A socket. (Note: Make sure the
voltage which is indicated on the device matches the local voltage
before connecting the device. Voltage 220V-240V 50Hz).
4
Assembly instructions
•
Remove the 3 screws out of the turnplate (Picture 1).
•
Put the front base onto the rear base and join them together
(Picture 2).
•
Pull the power cord through the hole of the base (Picture 2).
•
Align the base with the turnplate and use the 3 screws to secure
them together (Picture 3).
•
Press the power cord into the cable slot (Picture 4).
Advertisement
