Exterior Lights Litetower Series Instructions

LTWR400 / LTWR600
LTWR400-PC / LTWR600-PC
LTWR800 / LTWR1000
LTWR800-PC / LTWR1000-PC
PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE COMMENCING ANY WORK
•
This is a Class 1 product and must be earthed.
•
This unit must be fitted by a competent and qualified electrician.
•
Install in accordance with IEE wiring regulations and current Building Regulations
•
To prevent electrocution, switch off mains supply before installing or maintaining this
fitting. Ensure other persons cannot restore the electrical supply without your
knowledge.
•
This light fitting should be connected to a circuit with a 30Ma RCD fitted.
•
If replacing an existing fitting, make a careful note of the connections.
•
When changing the bulb, always switch off at the mains & allow the bulb to cool
before handling.
•
All connections should be made as watertight as possible to avoid electrical shortage
•
Always use the correct type & wattage of bulb. Never exceed the wattage stated.
•
The unit may get warm whilst on for a period of time.
Materials: Anodised Aluminium & Frosted Glass
Voltage: 220-240v 50Hz
Max. Wattage:
Lamp Fitting:
Recommended Lamp:
IP Rating: IP65
Product Height:
Sensor: Photocell (Dusk to Dawn) OPTIONAL

CLEANING:

Occasional cleaning and care is recommended for this product. Please refer
to our website for the best way to clean different materials.
Full product range & more information: www.exteriorlights.co.uk
Litetower Path Light 240v
INSTRUCTIONS
35W
ES / E27
LED
400mm / 600mm / 800mm / 1000mm
Tel: 01689 606342
Email:sales@exteriorlights.co.uk

WARNINGS

Producer Registration Number:
✔✔✔
3 YEAR
GUARANTEE
see website for
more details
WEE/KC3440XY