Sea Ray Sport Series Installation/Care
  1. Manuals
  2. Brands
  3. Sea Ray Manuals
  4. Boating Equipment
  5. Sport Series
  6. Installation/care
Sea Ray Sport Series Installation/Care

Sea Ray Sport Series Installation/Care

Canvas for sport boats & sport cruisers
Hide thumbs
Table of Contents

Advertisement

Quick Links

Canvas
Installation & Care
For Sport Boats &
Sport Cruisers
The Standard of Excellence
TM

Advertisement

Table of Contents
loading

Summary of Contents for Sea Ray Sport Series

  • Page 1 Canvas Installation & Care For Sport Boats & Sport Cruisers The Standard of Excellence...
  • Page 2 Thank you for purchasing your new Sea Ray boat. We are proud to be part of your boating experience. This guide is provided to help you with all of your canvas installation needs. Please remember to place your Canvas Handbook in a convenient place on your vessel.
  • Page 3 Sea Ray Boats, 2600 Sea Ray Blvd., Knoxville, TN 37914. For information call 1-800-SRBOATS or fax 1-636-326-3282. Internet address: http://www.searay.com...
  • Page 4 Sea Ray Canvas Care Care, Cleaning and General Information For Your Sea Ray Canvas The boat top and other canvas items supplied on your Sea Ray ® boat are manufactured from top quality materials to provide you with years of trouble-free service.
  • Page 5 All engines produce Carbon Monoxide. Operating your vessel with the canvas package installed can increase the risk of dangerous Carbon Monoxide fumes accumulating in and around the vessel. Sea Ray advises against running the boat with the canvas up, unless proper flow-through ventilation is established.

  • Page 6: Table Of Contents

    Keep this waterproof installation guide in your boat for easy reference. At Sea Ray, we offer service you can depend on and have earned a reputation for excellence in sales and service. Contact your local dealer with any questions concerning your canvas products.

  • Page 7: Tonneau Cover

    Find locator tags and position canvas on bow. Locate front edge of canvas and fasten center snap to front of boat. Fasten snaps halfway around on both sides of bow. Insert tension pole. Do NOT raise too high. Copyright © 2005 Sea Ray Boats...
  • Page 8 Fasten snaps up to walk-thru door. Adjust tension pole to tighten canvas. Fasten snaps and latch windshield. Adjust mooring pole. Complete Caution: To prevent damage to Tonneau Cover, be sure to unsnap cover from walk-thru door before opening. Copyright © 2005 Sea Ray Boats...

  • Page 9: Cockpit Cover (No Arch)

    Cockpit Cover (No Arch) Find locator tag and position canvas. Center canvas on windshield. Fasten snaps. If a Tonneau cover has been installed, secure the Velcro ® strips. Tuck canvas underneath the wiper and continue snapping. Copyright © 2005 Sea Ray Boats...
  • Page 10 Bring canvas over windshield and secure Velcro ® strips around Bimini Top and/or Camper Top poles if installed. Insert and raise front adjustable pole. Be careful not to raise too much or snapping will be difficult. Continue snapping. Copyright © 2005 Sea Ray Boats...
  • Page 11 Complete snapping. Pull nylon loop located at the corner of the canvas to help secure final snaps. Press down on cushioning and readjust poles if neccessary. Complete Note: If snaps are hard to attach adjust tension poles. Copyright © 2005 Sea Ray Boats...

  • Page 12: Cockpit Cover (Arch)

    Align center seam with center snap at base of windshield and fasten snaps. Tuck canvas underneath each wiper, and continue snapping. Pull flaps over windshield and around poles as necessary. Copyright © 2005 Sea Ray Boats...
  • Page 13 Insert adjustable pole into forward grommet. Raise pole, but not too high, and tighten knob. Wrap canvas around arch and snap to inside on both sides of the boat. Copyright © 2005 Sea Ray Boats...
  • Page 14 Continue snapping. Insert remaining two adjustable poles so they stand loosely in position. Continuing snapping on both sides of the boat. Use nylon loop to pull canvas to assist in fastening final snaps. Copyright © 2005 Sea Ray Boats...
  • Page 15 Attach bungee straps. Complete Note: If necessary enter the boat underneath the canvas to extend adjustable poles to tighten cover. Copyright © 2005 Sea Ray Boats...

  • Page 16: Bimini

    Bimini Identify Bimini Top. Remove pull pins from the 4 mounts. Position canvas with adjustable support pole downward. Insert the bow into the front mounts. Copyright © 2005 Sea Ray Boats...
  • Page 17 Insert pull pins. Unwrap Velcro ® straps to release support poles. Raise Bimini Top. Insert support poles into the rear mounts. Copyright © 2005 Sea Ray Boats...
  • Page 18 Insert pull pins. Wrap Velcro ® straps around support poles. Remove boot. Unwrap canvas. Pull Bimini Top forward to the open position. Push button and raise adjustable support poles to relax canvas. Copyright © 2005 Sea Ray Boats...
  • Page 19 Make sure the canvas is centered. Push button and lower adjustable support poles until button snaps into place to tighten canvas. Adjust straps to tighten canvas as necessary. Note: To adjust straps release tension on support poles. Complete Copyright © 2005 Sea Ray Boats...
  • Page 20 Note: The Bimini Top may be stored vertically with the boot. Place support poles in the raised position to gain headroom. Copyright © 2005 Sea Ray Boats...

  • Page 21: Three-Piece Visors

    Bimini Top. 3“ Beginning with the center visor, attach top zipper and zip about 3 inches. 3“ Attach top zippers of port and star- board visors and zip about 3 inches. Copyright © 2005 Sea Ray Boats...
  • Page 22 Attach vertical zippers on all visors and zip about 3 inches. Reach out and around to snap canvas onto windshield. Complete all zippers. Push button and lower adjustable support poles until they snap into place. Copyright © 2005 Sea Ray Boats...
  • Page 23 Complete Copyright © 2005 Sea Ray Boats...

  • Page 24: Side Curtains

    Position curtain outside of bows with zipper to the top. 3“ Attach top zipper and zip about 3 inches. 3“ Attach front zipper and zip about 3 inches. Copyright © 2005 Sea Ray Boats...
  • Page 25 Snap canvas onto boat. Complete all zippers. Secure all Velcro ® strips. Complete Copyright © 2005 Sea Ray Boats...

  • Page 26: Aft Curtain

    Find locator tag and position canvas. Bring the Aft Curtain to the Bimini Top. Attach the port then the starboard zippers and complete the zips. Attach vertical zipper on starboard side and complete the zip. Copyright © 2005 Sea Ray Boats...
  • Page 27 Attach vertical zipper on port side and complete the zip. Fasten snaps beginning at the center of the stern above the ski ring. Complete snapping at side curtains. Complete Copyright © 2005 Sea Ray Boats...

  • Page 28: Camper Package

    Camper Package LOCK UNLOCK Identify Camper Top. Remove pull pins from the 4 mounts. Insert bow into the front mounts with support pole to rear. Insert pull pins. Copyright © 2005 Sea Ray Boats...
  • Page 29 Unwrap Velcro ® straps to release support poles. Insert the adjustable support poles into the rear mounts. Insert pull pins. Wrap Velcro ® straps around support poles. Remove boot and unwrap canvas. Copyright © 2005 Sea Ray Boats...
  • Page 30 Pull the front of the Camper Top canvas to the rear of the Bimini Top. Attach top zippers and complete the zip to the right and left. Secure all Velcro ® strips. Make sure canvas is centered on the bow; realign as neccessary. Copyright © 2005 Sea Ray Boats...
  • Page 31 Pull hard if necessary. Complete Camper Side Curtains Find locator tags and position panels port and starboard. 3“ Attach top zipper and zip about 3 inches on each side of the boat. Copyright © 2005 Sea Ray Boats...
  • Page 32 3“ Attach vertical zipper to side curtain and zip about 3 inches on each side of the boat. Snap canvas onto boat. Complete all zippers. Complete Copyright © 2005 Sea Ray Boats...
  • Page 33 Find locator tag and position canvas. 3“ 3“ Attach top zipper and zip about 3 inches on both sides. Attach and complete vertical zipper on the port side. Complete top zipper on the port side. Copyright © 2005 Sea Ray Boats...
  • Page 34 3“ Attach vertical zipper on starboard side and zip about 3 inches. Note: This may be easier from outside. Fasten snaps or attach bungees to boat. Complete all zippers. Secure all Velcro ® strips. Copyright © 2005 Sea Ray Boats...
  • Page 35 Complete Copyright © 2005 Sea Ray Boats...

  • Page 36: Sundeck Bimini

    (Some boats may have only 4 mounts.) Position the rear Bimini so that the hinged bow faces forward and the support pole faces the rear of the boat. Insert bow into front mounts with support poles to rear. Copyright © 2005 Sea Ray Boats...
  • Page 37 Insert pull pins. Unwrap Velcro ® straps to release support poles. Insert support poles into rear mounts. Insert pull pins. Wrap Velcro ® straps around support poles. Copyright © 2005 Sea Ray Boats...
  • Page 38 Remove boot. Pull bow forward. Push button and raise adjustable support poles until they snap into place. Attach straps to the hooks in front of or on the windshield. Copyright © 2005 Sea Ray Boats...
  • Page 39 (For 5-pole bimini) Insert sway pole into mount at the rear of the boat. (For 5-pole bimini) Insert pull pin. Wrap Velcro ® strap around sway pole. Copyright © 2005 Sea Ray Boats...
  • Page 40 Complete Rear Bimini. Forward Bimini Identify Forward Bimini. (Available only on Sundecks.) Remove pull pins from all 4 mounts. Position the front canvas with support poles facing the rear of the boat. Copyright © 2005 Sea Ray Boats...
  • Page 41 Insert bow into front mounts. Insert pull pins. Unwrap Velcro ® straps. Insert support poles into the rear mounts. Copyright © 2005 Sea Ray Boats...
  • Page 42 Insert pull pins. Wrap Velcro ® straps around the support poles. Remove boot. Unwrap straps. Pull bow forward. Bring the two canvases together and attach both zippers. Copyright © 2005 Sea Ray Boats...
  • Page 43 Complete both zippers. Attach straps to the front of the boat. Make sure canvas is centered on bows. Complete Stored Copyright © 2005 Sea Ray Boats...

  • Page 44: Convertible Top

    With bow in a vertical position, slide saddle mount over windshield edge at the drilled hole. Insert pull pins from the outside. Copyright © 2005 Sea Ray Boats...
  • Page 45 Remove boot if provided. Unwrap canvas. Fasten snaps to windshield. Pull bow toward the rear of the boat. Copyright © 2005 Sea Ray Boats...

  • Page 46: Convertible Side Curtains

    Adjust slide to ensure that the canvas is tight. Detach strap if necessary to adjust. Complete Convertible Side Curtains Find locator tags and identify port and starboard curtains. Copyright © 2005 Sea Ray Boats...
  • Page 47 Position curtains outside of bows with zippers to the top. 3“ Attach top zipper and zip about 3 inches on each side of the boat. Snap to windshield and boat. Complete top zippers. Copyright © 2005 Sea Ray Boats...

  • Page 48: Convertible Aft Curtain

    Secure Velcro ® strips. Complete Convertible Aft Curtain Position canvas with zippers toward the top. 3“ 3“ Attach top zippers and zip to the right and left about 3 inches. Copyright © 2005 Sea Ray Boats...
  • Page 49 Attach vertical zippers to Side Curtains and zip about 3 inches. Complete all zippers. Pull flap over zipper. Secure Velcro ® strips. Copyright © 2005 Sea Ray Boats...
  • Page 50 Snap curtain to boat. Press down on cushioning if necessary. Complete Copyright © 2005 Sea Ray Boats...
  • Page 51 With bow in a vertical position, slide saddle mount over windshield edge at the drilled hole. Insert pull pins from the outside. Copyright © 2005 Sea Ray Boats...
  • Page 52 Remove boot if provided. Unwrap canvas. Fasten snaps to windshield. Pull bow toward the rear of the boat. Copyright © 2005 Sea Ray Boats...
  • Page 53 Adjust slide to ensure that the canvas is tight. Detach strap if necessary to adjust. Complete Convertible Side Curtains Find locator tags and identify port and starboard curtains. Copyright © 2005 Sea Ray Boats...
  • Page 54 Position curtains outside of bows with zippers to the top. 3“ Attach top zipper and zip about 3 inches on each side of the boat. Snap to windshield and boat. Complete top zippers. Copyright © 2005 Sea Ray Boats...
  • Page 55 Secure Velcro ® strips. Complete Convertible Aft Curtain Position canvas with zippers toward the top. 3“ 3“ Attach top zippers and zip to the right and left about 3 inches. Copyright © 2005 Sea Ray Boats...
  • Page 56 Attach vertical zippers to Side Curtains and zip about 3 inches. Complete all zippers. Pull flap over zipper. Secure Velcro ® strips. Copyright © 2005 Sea Ray Boats...
  • Page 57 Snap curtain to boat. Press down on cushioning if necessary. Complete Copyright © 2005 Sea Ray Boats...

  • Page 58: Sport Series Tower Bimini

    Identify Tower Bimini. Remove pull pins from the 2 mounts on the inside of the tower. Position the Bimini with the adjustable bow on top and insert bow into the mounts. Insert pull pins. Copyright © 2005 Sea Ray Boats...
  • Page 59 Remove boot. Push button and slide adjustable bow toward mount on both sides of the boat. Pull the Tower Bimini forward. Attach front straps to the tower. Copyright © 2005 Sea Ray Boats...
  • Page 60 Extend the adjustable bow until the button snaps into place. Attach rear straps to the boat. Adjust straps to tighten canvas as necessary. Complete Copyright © 2005 Sea Ray Boats...
  • Page 61 Storing Bimini Undo front straps. Push button and slide adjustable bow down towards mount. Pass bow under tower then extend bow. Fold canvas. Replace boot. Wrap straps around tower and clip. Complete Copyright © 2005 Sea Ray Boats...

  • Page 62: Select Series Tower Bimini

    Select Series Tower Bimini Identify Select Tower Bimini. Remove pull pins from the 2 mounts on the front of the tower. Insert bow into the mounts. Insert pull pins. Copyright © 2005 Sea Ray Boats...
  • Page 63 Unwrap the two straps from around the boot. Remove boot. Unroll the Bimini canvas. Pull canvas over the top of the tower and fasten all snaps. Copyright © 2005 Sea Ray Boats...
  • Page 64 Pull bow forward. Attach straps to the tower. Adjust straps. Complete Copyright © 2005 Sea Ray Boats...
  • Page 65 Storing Bimini Unhook front straps. Lower bow onto tower. Unsnap snaps on tower. Roll canvas around the bow. Copyright © 2005 Sea Ray Boats...
  • Page 66 Replace boot. Wrap straps around boot and tower. Secure Velcro ® strips. Stored Copyright © 2005 Sea Ray Boats...

  • Page 67: Forward-Facing Tower Bimini

    Forward-Facing Tower Bimini Identify forward Tower Bimini. Remove pull pins from the 2 mounts on the front of the tower. Insert bow into mounts. Insert pull pins. Copyright © 2005 Sea Ray Boats...
  • Page 68 Unwrap the two straps from around the boot. Remove the boot. Unroll the canvas. Pull the canvas over the top of the tower. Copyright © 2005 Sea Ray Boats...
  • Page 69 Wrap canvas around rear tower crossbar. Attach left and right corner zippers and zip. Attach 2 center zippers and zip. Make sure the canvas is centered. Push buttons and extend adjustable support poles until they snap into place. Copyright © 2005 Sea Ray Boats...
  • Page 70 Adjust as necessary to tighten the canvas. Rear Tower Bimini Identify rear Tower Bimini (shorter bow). Remove the pull pins from the 2 mounts on the rear of the tower. Insert bow into mounts. Copyright © 2005 Sea Ray Boats...
  • Page 71 Insert pull pins. Remove the boot. Unwrap the two straps from around the boot. Unroll the canvas. Copyright © 2005 Sea Ray Boats...
  • Page 72 Bring the canvas to the forward Tower Bimini. Attach right zipper and zip completely. Attach left zipper and zip completely. Attach straps to rear of the tower. Adjust as necessary to tighten the canvas. Complete Copyright © 2005 Sea Ray Boats...
  • Page 73 Bimini Storage Unhook rear Tower Bimini straps from the tower. Unzip all zippers attached to the rear Tower Bimini. Roll the canvas around the bow. Replace the boot. Copyright © 2005 Sea Ray Boats...
  • Page 74 Push button and retract adjustable support poles. Unhook forward Tower Bimini straps from the tower. Unzip all zippers attached to the forward Tower Bimini. Roll the canvas around the bow. Replace the boot. Copyright © 2005 Sea Ray Boats...
  • Page 75 Pull the bows to the tower. Secure the Velcro ® straps around the bow and the front tower crossbar. Secure the Velcro ® straps around the bow and the rear tower crossbar. Stored Copyright © 2005 Sea Ray Boats...

  • Page 76: Forward Sunshade (Arch)

    Forward Sunshade (Arch) Identify Bimini Top. Remove pull pins from the ends of the bow. Rest canvas on the windshield with the bow on top. Insert bow into rear mounts. Insert pull pins and lock. Copyright © 2005 Sea Ray Boats...
  • Page 77 ® straps to release the adjustable support poles and remove pull pins. Insert support poles into front mounts. Insert pull pins and lock. Wrap Velcro ® straps around support poles, securing the pull-pin lanyards. Copyright © 2005 Sea Ray Boats...
  • Page 78 Unwrap the canvas. Lift the Bimini Top to the top of the arch. Attach zippers. Zip and snap across the top of the arch. Copyright © 2005 Sea Ray Boats...
  • Page 79 Fasten all snaps. Lower adjustable support poles. Pull downward on bow to lock spring-loaded buttons into place. Make sure top is centered on bow. Complete Copyright © 2005 Sea Ray Boats...

  • Page 80: Aft Sunshade

    Unwrap Velcro ® straps to release adjustable support poles and remove pull pins. Insert bow into upper mounts on arch. Insert pull pins and lock. Copyright © 2005 Sea Ray Boats...
  • Page 81 Insert adjustable support poles into lower mounts on the arch. Insert pull pins and lock. Wrap Velcro ® straps around support poles, securing the pull-pin lanyards. Raise adjustable support poles until the spring-loaded buttons snap into the lowest position.
  • Page 82 Lift the Sunshade Top to the top of the arch. Attach top zippers and complete the zip to the right and left. Slide canvas until the top center snap is aligned with the center snap on the arch. Fasten all snaps. Copyright © 2005 Sea Ray Boats...
  • Page 83 Lower adjustable support poles. Pull down on bow to lock buttons into place. Make sure top is centered on bows. Complete Copyright © 2005 Sea Ray Boats...

  • Page 84: Three-Piece Visors

    Beginning with the center visor, attach top zipper and zip about 3 inches. 3“ Attach top zipper of port visor and zip about 3 inches. 3“ Attach top zipper of starboard visor and zip about 3 inches. Copyright © 2005 Sea Ray Boats...
  • Page 85 3“ Attach vertical zippers and zip about 3 inches. Fasten snaps to the windshield, working from the center to the outside. Complete all zippers and secure Velcro ® strips. Complete Copyright © 2005 Sea Ray Boats...

  • Page 86: Side Curtains

    3“ Attach top zipper and zip about 3 inches. 3“ Attach vertical zipper and zip about 3 inches. 3“ 3 Attach white arch zipper and, from outside of the boat, zip about 3 inches. Copyright © 2005 Sea Ray Boats...
  • Page 87 Fasten snaps to windshield. Complete arch zipper and fasten snaps to arch. Secure all Velcro ® strips. Complete remaining zippers. Note: Can be zipped from inside or outside. Copyright © 2005 Sea Ray Boats...
  • Page 88 Complete Copyright © 2005 Sea Ray Boats...

  • Page 89: Aft Curtain

    Pull the Aft Curtain to the Sunshade Top. Attach top zippers and zip about 3 inches. Attach white zippers to the arch and zip about 3 inches. Beginning on the starboard side, fasten snaps to boat. Copyright © 2005 Sea Ray Boats...
  • Page 90 Pull on nylon loop provided if difficult to fasten snaps. Attach bungee straps. Re-enter the boat through the zippered walk-thru. Complete all zippers. Copyright © 2005 Sea Ray Boats...
  • Page 91 Complete Copyright © 2005 Sea Ray Boats...

  • Page 92: Camper Package

    Camper Package Identify Camper Top. Remove pull pins. Insert bow into the front mounts. Insert pull pins. Copyright © 2005 Sea Ray Boats...
  • Page 93 Remove Velcro ® straps to release the adjustable support poles. Insert adjustable support poles into the rear mounts. Insert pull pins. Wrap Velcro ® straps around support poles. Remove boot and unwrap canvas. Copyright © 2005 Sea Ray Boats...
  • Page 94 Slide arch zipper to center canvas if necessary. Lower adjustable support poles. Pull down on bow to lock buttons into place. Make sure top is centered on bows. Complete Copyright © 2005 Sea Ray Boats...
  • Page 95 Camper Side Curtains Find locator tags and identify the port and starboard curtains. Attach arch zipper and zip about 3 inches. 3“ Attach top zipper and zip about 3 inches. Snap canvas onto boat. Copyright © 2005 Sea Ray Boats...
  • Page 96 Complete the top zipper. Complete the arch zipper. Check all Velcro ® closures. Copyright © 2005 Sea Ray Boats...
  • Page 97 Camper Aft Curtain Find locator tag and position the Camper Aft Curtain. 3“ Attach top zippers and zip about 3 inches. 3“ Attach vertical zippers and zip about 3 inches. Complete top and portside zippers. Copyright © 2005 Sea Ray Boats...
  • Page 98 Attach bungee straps. Complete the starboard zipper. Secure all Velcro ® strips. Complete Copyright © 2005 Sea Ray Boats...
  • Page 99 Copyright © 2005 Sea Ray Boats...

  • Page 100: Sportsman Visors (Hard Top)

    Attach top zipper of the center visor and zip about 3 inches. 3“ Attach top zipper of the starboard visor and zip about 3 inches. 3“ Attach top zipper of the port visor and zip about 3 inches. Copyright © 2005 Sea Ray Boats...
  • Page 101 Attach vertical zippers of the center visor and zip about 3 inches. Fasten snaps to the windshield, working from the center to the outside. Complete all zippers. Side Curtains Identify port and starboard curtains. Copyright © 2005 Sea Ray Boats...
  • Page 102 Slide curtain into place along the length of the arch. 3“ 3 Attach top zipper and zip about 3 inches from the inside. Attach vertical zipper to the front visor and zip about 3 inches from the inside. Copyright © 2005 Sea Ray Boats...
  • Page 103 CLEAR Tuck the corner flap under the soft top next to the arch. Fasten snaps to windshield. Complete all zippers. Repeat the process on the other side of the boat. Complete Copyright © 2005 Sea Ray Boats...

  • Page 104: Sportsman Aft Curtain (Hard Top)

    Insert top of wing welt into the track on the arch. Slide wing into place along the length of the arch. 3“ Attach top zipper to the soft top and zip about 3 inches. Copyright © 2005 Sea Ray Boats...
  • Page 105 Begin snapping at base of the arch and fasten all snaps. Repeat process with the other wing. Bring center curtain to the soft top. 3“ 3“ Attach center zippers and zip about 3 inches. Copyright © 2005 Sea Ray Boats...
  • Page 106 Attach starboard side top zipper and zip about 3 inches. Attach vertical zipper of the port wing to the center curtain and zip about 3 inches. Attach vertical zipper of the starboard wing to the center curtain and complete the zip. Copyright © 2005 Sea Ray Boats...
  • Page 107 3“ Complete all horizontal zippers. Fasten snaps to the boat on the port side. Attach bungee straps. Continue snapping on the starboard side. Copyright © 2005 Sea Ray Boats...
  • Page 108 Complete vertical zippers from inside or outside the boat. Complete Portside passageway access Copyright © 2005 Sea Ray Boats...

  • Page 109: Clear Vinyl Storage

    Lay vinyl on a soft material or towels (not provided). Layer the clear vinyl panels so that vinyl does not touch other vinyl. Roll, taking care not to place a zipper on vinyl. Place in storage bag. Copyright © 2005 Sea Ray Boats...
  • Page 110 Stow in a dry place. Complete Note for Camper Tops and Aft Curtains: Fold canvas to cover the front and back of the clear vinyl. Roll so that no vinyl is stored next to vinyl. Copyright © 2005 Sea Ray Boats...

This manual is also suitable for:

Select seriesSunbrellaSea markSundeck

Table of Contents