Table of Contents
Advertisement
Quick Links
QUANTUM QUICK RELEASE "L" BRACKET QF70
INSTRUCTIONS
Connect the thumbscrew to the bracket by threading it through the end of the bracket slot.
Mount and position camera to bracket using the thumbscrew.
Connect Qflash to handle grip of "L" Bracket by rotating grip clockwise until the
rubber pad of the handle grip comes in contact with the base of the Qflash.
Continue to tighten 1/2 to 1 (maximum) complete turn until the slot in the handle
lines up with the Qflash cord.
"L" Bracket Assembly
Slide the bracket into the slot on the bottom of the handle grip.
Bracket can be inserted into either end of slot. The bracket will lock into place.
Disassembling the "L" Bracket
Push the release button located at the bottom of the handle grip,
while pulling the bracket from the handle.
Typical Mounting Configurations
Advertisement
Table of Contents
Related Manuals for Quantum QF70
Summary of Contents for Quantum QF70
- Page 1 QUANTUM QUICK RELEASE "L" BRACKET QF70 INSTRUCTIONS Connect the thumbscrew to the bracket by threading it through the end of the bracket slot. Mount and position camera to bracket using the thumbscrew. Connect Qflash to handle grip of "L" Bracket by rotating grip clockwise until the rubber pad of the handle grip comes in contact with the base of the Qflash.
- Page 2 Accessory hole, used to mount a TTL Tripod Mount, using The threaded hole on the bottom of the thumbscrew can be adapter to the bracket. threaded tripod hole. used for mounting the bracket to a tripod. IMPORTANT Always turn the Battery Power Pack OFF when connecting or disconnecting an adapter to the Qflash or camera.
Need help?
Do you have a question about the QF70 and is the answer not in the manual?
Questions and answers