Download Print this page

Enhance Mobility Hercules Instructions

Scooter lift

Instructions for using the Hercules Scooter Lift

The Hercules Scooter lift is designed to be used with the Solax Mobie Plus and Transformer

mobility scooters. This portable lift allows you to pick up and move around the scooter so

that you can place it in a vehicle for easy transport. The lift also collapses down to a

manageable size for easy storage and transport.

2) Lower the front legs down until the red wheels are touching the ground and the

brackets lock into place.

15410 CR 565A, Suite C Groveland, FL 34736 www.enhancemobility.com 1-800-296-4151

1) Here is a photo of the lift in its most

compact and travel/storage ready

position.

Enhance your Life!

Table of Contents

Do you have a question about the Hercules and is the answer not in the manual?

Page 1 Instructions for using the Hercules Scooter Lift The Hercules Scooter lift is designed to be used with the Solax Mobie Plus and Transformer mobility scooters. This portable lift allows you to pick up and move around the scooter so that you can place it in a vehicle for easy transport. The lift also collapses down to a manageable size for easy storage and transport.
Page 2 3) Make sure the hinge (located in red circle on the photo to the left) is locked before moving to the next step. 4) Lift the motor into position as shown in the photo to the left. 15410 CR 565A, Suite C Groveland, FL 34736 www.enhancemobility.com 1-800-296-4151 Enhance your Life!
Page 3 6) Attach the power cord to the charging port on your Scooter. 7) Attach the other end of the power cord to the port on the Hercules Lift Motor (as shown in the red circle in the photo to the left).
Page 4 8) Lower the belt to desired length by pressing the dual switch on the motor of the scooter lift down towards the ground (as shown in the photo to the left in the red circle). 9) Wrap the belt around the metal bar in between the tiller and the seat. Secure the belt by clipping the belt into the metal loop.
Page 5 10) To raise the scooter off the ground, make sure the brake is engaged and push up on the dual switch located on the motor of the scooter lift. See Photo below 11) Once you have it raised to desired height, unlock the brake and move the lift and scooter to the desired location.